G = 0.2, Level Translation,
16-Bit ADC Driver
AD8275
FEATURES
PIN CONFIGURATION
Translates 10 V to +4 V
Drives 16-bit SAR ADCs
Small MSOP package
Input overvoltage: +40 V to −35 V (VS = 5 V)
Fast settling time: 450 ns to 0.001%
Rail-to-rail output
Wide supply operation: +3.3 V to +15 V
High CMRR: 80 dB
REF1
–IN
1
2
3
4
8
7
6
5
REF2
+V
AD8275
S
TOP VIEW
+IN
OUT
(Not to Scale)
–V
SENSE
S
Figure 1.
TYPICAL APPLICATION
+5V
0.1µF
0.1µF
Low gain drift: 1 ppm/°C
Low offset drift: 2.5 μV/°C
7
+4.048V
+2.048V
+0.048V
+V
S
+10V
50kΩ
–IN
10kΩ
2
5
APPLICATIONS
SENSE
33Ω
VDD
AD7685
GND
IN+
IN–
OUT
Level translator
ADC driver
6
2.7nF
REF
50kΩ
+IN
20kΩ
20kΩ
Instrumentation amplifier building block
Automated test equipment
3
8
1
VIN
–10V
REF2
REF1
VREF
4.096V
10µF
AD8275 –V
S
4
Figure 2. Translating 10 V to 4.096 V ADC Full Scale
GENERAL DESCRIPTION
The AD8275 is a G = 0.2 difference amplifier that can be used
to translate 10 V signals to a +4 V level. It solves the problem
typically encountered in industrial and instrumentation applic-
ations where 10 V signals must be interfaced to a single-supply
4 V or 5 V ADC. The AD8275 interfaces the two signal levels,
simplifying design.
The AD8275 can be used as an analog front end, or it can follow
buffers to level translate high voltages to a voltage range accepted
by the ADC. In addition, the AD8275 can be configured for diff-
erential outputs if used with a differential ADC.
The AD8275 is available in a space-saving, 8-lead MSOP
and is specified for performance over the −40°C to +85°C
temperature range.
The AD8275 has fast settling time of 450 ns and low distortion,
making it suitable for driving medium speed successive approx-
imation (SAR) ADCs. Its wide input voltage range and rail-to-
rail outputs make it an easy to use building block. Single-supply
operation reduces the power consumption of the amplifier and
helps to protect the ADC from overdrive conditions.
Table 1. Difference Amplifiers by Category
Single-Supply
Current Sense
Low Distortion
AD8270
High Voltage
AD628
AD8202
AD8273
AD629
AD8203
Internal, matched, precision laser-trimmed resistors ensure
low gain error, low gain drift of 1 ppm/°C (maximum), and
high common-mode rejection of 80 dB. Low offset and low
offset drift, combined with its fast settling time, make the
AD8275 suitable for a variety of data acquisition applications
where accurate and quick capture is required.
AD8274
AD8205
AD8275
AD8206
AMP03
AD8216
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2008-2010 Analog Devices, Inc. All rights reserved.