Buffered 2:1 TMDS Switch
AD8193
FEATURES
FUNCTIONAL BLOCK DIAGRAM
AVCC AVEE
2 inputs, 1 output HDMI/DVI high speed signal switch
Pin-to-pin compatible with the AD8194
Enables HDMI 1.3-compliant receiver
CONTROL
LOGIC
AD8193
S_SEL
VTTI
4 TMDS channels per input/output
Supports 250 Mbps to 2.25 Gbps data rates
Supports 25 MHz to 225 MHz pixel clocks
Fully buffered unidirectional inputs/outputs
Supports more than 20 m of input cable at 1080i, more
than 10 m of input cable at 1080p, and more than 6
meters of input cable at 1080p, 12-bit color
Matched 50 Ω input and output on-chip terminations
Low added jitter
VTTO
+
–
4
4
IP_A[3:0]
IN_A[3:0]
+
–
4
4
OP[3:0]
ON[3:0]
SWITCH
CORE
Rx
Tx
+
–
4
4
IP_B[3:0]
IN_B[3:0]
HIGH SPEED
BUFFERED
Single-supply operation (3.3 V)
VTTI
Standards compliant: HDMI receiver, DVI
32-lead, 5 mm × 5 mm, RoHS-compliant LFCSP
Figure 1.
TYPICAL APPLICATION
HDTV SET
APPLICATIONS
Advanced television (HDTV) sets
Multiple input displays
Projectors
HDMI
RECEIVER
SET-TOP BOX
DVD PLAYER
AD8193
A/V receivers
Set-top boxes
Figure 2. Typical AD8193 Application for HDTV Sets
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The AD8193 is a low cost quad 2:1 TMDS® switch for high
speed HDMI™/DVI video applications. Its primary function is
to switch the high speed signals from one of two single-link
(HDMI or DVI) sources to the single-link output. The AD8193
is a fully buffered switch solution with 50 Ω input and output
terminations, providing full-swing output signal recovery and
minimizing reflections for improved system signal integrity.
1. Data supports rates up to 2.25 Gbps, enabling greater than
1080p deep color (12-bit color) HDMI formats and greater
than UXGA (1600 × 2300) DVI resolutions.
2. Fully buffered unidirectional inputs and outputs.
3. Supports more than 20 meters of a typical 24 AWG input
cable at 1080i, more than 10 meters at 1080p, and more
than 6 meters at 1080p, 12-bit color.
4. Matched 50 Ω on-chip input and output terminations
improve system signal integrity.
5. Single-pin source select bit.
6. Input terminations are automatically switched out for the
unselected input.
The AD8193 is provided in a space-saving, 32-lead, LFCSP,
surface-mount, RoHS-compliant, plastic package and is specified
to operate over the −40°C to +85°C temperature range.
7. Low added jitter.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2007 Analog Devices, Inc. All rights reserved.