18-Bit, 100 kSPS/500 kSPS
PulSAR ADCs in MSOP/LFCSP
Data Sheet
AD7989-1/AD7989-5
FEATURES
GENERAL DESCRIPTION
Low power dissipation
AD7989-1
The AD7989-1/AD7989-5 are 18-bit, successive approximation,
analog-to-digital converters (ADCs) that operate from a single
power supply, VDD. The AD7989-1/AD7989-5 contain a low
power, high speed, 18-bit sampling ADC and a versatile serial
interface port. On the CNV rising edge, the AD7989-1/AD7989-5
sample the voltage difference between the IN+ and IN− pins.
The voltages on these pins typically swing in opposite phases
between 0 V and VREF. The reference voltage, VREF, is applied
externally and can be set independent of the supply voltage,
VDD. Its power scales linearly with throughput.
400 μW at 100 kSPS typical (VDD only)
700 μW at 100 kSPS typical (total)
AD7989-5
2 mW at 500 kSPS typical (VDD only)
3.5 mW at 500 kSPS typical (total)
18-bit resolution with no missing codes
Throughput
AD7989-1
100 kSPS
AD7989-5
500 kSPS
INL: 1 LSB typical, 2 LSB maximum
SNR: 98 dB at 1 kHz, VREF = 5 V typical
SINAD: 97 dB at 1 kHz typical
THD: −120 dB at 10 kHz typical
Dynamic range: 99 dB at VREF = 5 V typical
True differential analog input voltage range: VREF
0 V to VREF with VREF between 2.4 V and 5.1 V
No pipeline delay
The AD7989-1/AD7989-5 are serial peripheral interface (SPI)-
CS
compatible, which features the ability, using the SDI/ input,
to daisy-chain several ADCs on a single 3-wire bus. The
AD7989-1/AD7989-5 are compatible with 1.8 V, 2.5 V, 3 V, and
5 V logic, using the separate VIO supply.
The AD7989-1/AD7989-5 are available in a 10-lead MSOP or a
10-lead LFCSP with operation specified from −40°C to +85°C.
Table 1. MSOP and LFCSP 14-/16-/18-Bit PulSAR® ADCs
Bits 100 kSPS
250 kSPS
AD76912
400 kSPS to 500 kSPS
AD76902
≥1000 kSPS
AD79822
181
AD7989-12
AD7989-52
AD76882
AD76932
AD79162
AD76862
AD79842
AD79152
Single-supply 2.5 V operation with 1.8 V, 2.5 V, 3 V, and 5 V
logic interface
Proprietary serial interface SPI-/QSPI™-/MICROWIRE™-/
DSP-compatible1
Ability to daisy-chain multiple ADCs
10-lead MSOP and 3 mm × 3 mm 10-Lead LFCSP
161
AD7684
AD76872
163
143
AD7680
AD7683
AD7988-12
AD7940
AD76852
AD7694
AD79802
AD79832
AD7988-52
AD79422
AD79462
APPLICATIONS
Battery-powered equipment
Data acquisition systems
Medical instruments
1 True differential.
2 Pin for pin compatible.
3 Pseudo differential.
Seismic data acquisition systems
TYPICAL APPLICATIONS CIRCUIT
2.5V TO 5V 2.5V
VIO
1.8V TO 5.5V
REF VDD
SDI/CS
AD7989-1/
AD7989-5
IN+
3- OR 4-WIRE
INTERFACE
(SPI, CS,
SCK
SDO
CNV
±10V, ±5V, ..
IN–
DAISY CHAIN)
GND
ADA4941-1
Figure 1.
1 Protected by U.S. Patent 6,703,961.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2014–2017 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com