5秒后页面跳转
捷配首页

Datasheet > 转换器 > 模数转换器> AD7934-6
AD7934-6 PDF预览

AD7934-6

更新时间： 2024-02-01 04:11:47
品牌 Logo 应用领域
亚德诺 - ADI /
页数 文件大小 规格书
28页 924K
描述
4-Channel, 625 kSPS, 12-Bit Parallel ADC with a Sequencer

阅读下载

中文翻译

获取价格

AD7934-6 技术参数

是否无铅： 含铅是否Rohs认证： 不符合
生命周期：Obsolete零件包装代码：SSOP
包装说明：TSSOP-28针数：28
Reach Compliance Code：not_compliantECCN代码：EAR99
HTS代码：8542.39.00.01风险等级：5.75
最大模拟输入电压：5 V转换器类型：ADC, SUCCESSIVE APPROXIMATION
JESD-30 代码：R-PDSO-G28JESD-609代码：e0
长度：9.7 mm最大线性误差 (EL)：0.0244%
湿度敏感等级：1模拟输入通道数量：4
位数：12功能数量：1
端子数量：28最高工作温度：85 °C
最低工作温度：-40 °C输出位码：2'S COMPLEMENT BINARY
输出格式：PARALLEL封装主体材料：PLASTIC/EPOXY
封装代码：TSSOP封装等效代码：TSSOP28,.25
封装形状：RECTANGULAR封装形式：SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
峰值回流温度（摄氏度）：240电源：3/5 V
认证状态：Not Qualified采样速率：0.625 MHz
采样并保持/跟踪并保持：TRACK座面最大高度：1.1 mm
子类别：Analog to Digital Converters标称供电电压：3 V
表面贴装：YES温度等级：INDUSTRIAL
端子面层：Tin/Lead (Sn/Pb)端子形式：GULL WING
端子节距：0.65 mm端子位置：DUAL
处于峰值回流温度下的最长时间：NOT SPECIFIED宽度：4.4 mm
Base Number Matches：1

AD7934-6 数据手册

 浏览型号AD7934-6的Datasheet PDF文件第2页浏览型号AD7934-6的Datasheet PDF文件第3页浏览型号AD7934-6的Datasheet PDF文件第4页浏览型号AD7934-6的Datasheet PDF文件第5页浏览型号AD7934-6的Datasheet PDF文件第6页浏览型号AD7934-6的Datasheet PDF文件第7页 
4-Channel, 625 kSPS, 12-Bit  
Parallel ADC with a Sequencer  
AD7934-6  
FUNCTIONAL BLOCK DIAGRAM  
FEATURES  
Throughput rate: 625 kSPS  
V
AGND  
DD  
Specified for VDD of 2.7 V to 5.25 V  
Power consumption  
AD7934-6  
V
REFIN/  
V
REFOUT  
2.5V  
3.6 mW max at 625 kSPS with 3 V supplies  
7.5 mW max at 625 kSPS with 5 V supplies  
4 analog input channels with a sequencer  
Software configurable analog inputs  
4-channel single-ended inputs  
2-channel fully differential inputs  
2-channel pseudo differential inputs  
Accurate on-chip 2.5 V reference  
0.2ꢀ max @ 25°C, 25 ppm/°C max  
70 dB SINAD at 50 kHz input frequency  
No pipeline delays  
VREF  
V
V
0
IN  
IN  
CLKIN  
12-BIT  
SAR ADC  
AND  
I/P  
CONVST  
T/H  
MUX  
CONTROL  
BUSY  
3
SEQUENCER  
V
PARALLEL INTERFACE/CONTROL REGISTER  
DRIVE  
High speed parallel interface—word/byte modes  
Full shutdown mode: 2 µA max  
28-lead TSSOP package  
DB0 DB11  
CS RD WR W/B  
DGND  
Figure. 1  
GENERAL DESCRIPTION  
The AD7934-6 uses advanced design techniques to achieve very  
low power dissipation at high throughput rates. The part also  
features flexible power management options. An on-chip control  
register allows the user to set up different operating conditions,  
including analog input range and configuration, output coding,  
power management, and channel sequencing.  
The AD7934-6 is a 12-bit, high speed, low power, successive  
approximation (SAR) analog-to-digital converter (ADC). The  
part operates from a single 2.7 V to 5.25 V power supply and  
features throughput rates up to 625 kSPS. The part contains a  
low noise, wide bandwidth, differential track-and-hold  
amplifier that handles input frequencies up to 50 MHz.  
PRODUCT HIGHLIGHTS  
The AD7934-6 features four analog input channels with a channel  
sequencer that allows a preprogrammed selection of channels to  
be converted sequentially. This part can accept either single-  
ended, fully differential, or pseudo differential analog inputs.  
1. High throughput with low power consumption.  
2. Four analog inputs with a channel sequencer.  
3. Accurate on-chip 2.5 V reference.  
4. Single-ended, pseudo differential, or fully differential analog  
inputs that are software selectable.  
Data acquisition and conversion are controlled by standard control  
inputs, which allow for easy interfacing to microprocessors and  
5. No pipeline delay.  
DSPs. The input signal is sampled on the falling edge of  
,
CONVST  
6. Accurate control of the sampling instant via a  
and once off conversion control.  
input  
CONVST  
which is also the point where the conversion is initiated.  
The AD7934-6 has an accurate on-chip 2.5 V reference that  
can be used as the reference source for the analog-to-digital  
Table 1. Related Devices  
conversion. Alternatively, this pin can be overdriven to provide  
an external reference.  
Similar  
Device  
Number  
of Bits  
Number of  
Channels  
Speed  
AD7938/39  
AD7933/34  
AD7938-6  
12/10  
10/12  
12  
8
4
8
1.5 MSPS  
1.5 MSPS  
625 kSPS  
Rev. A  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice.  
No license is granted by implication or otherwise under any patent or patent rights of Analog  
Devices.Trademarks and registered trademarks are theproperty of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
© 2005 Analog Devices, Inc. All rights reserved.  
 
1234567...28

中文翻译

下载PDF

与AD7934-6相关器件

型号 品牌 获取价格 描述 数据表
AD7934-6_17 ADI

获取价格

 		4-Channel, 625 kSPS, 12-Bit Parallel ADC with a Sequencer
AD7934-6BRU ADI

获取价格

 		IC 4-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDSO28, TSSOP-28, Analog to
AD7934BRU ADI

获取价格

 		4-Channel, 1.5 MSPS, 12-Bit and 10-Bit Parallel ADCs with a Sequencer
AD7934BRU ROCHESTER

获取价格

 		4-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDSO28, MO-153-AE, TSSOP-28
AD7934BRU-6 ADI

获取价格

 		4-Channel, 625 kSPS, 12-Bit Parallel ADC with a Sequencer
AD7934BRU-6REEL ADI

获取价格

 		4-Channel, 625 kSPS, 12-Bit Parallel ADC with a Sequencer
AD7934BRU-6REEL7 ADI

获取价格

 		4-Channel, 625 kSPS, 12-Bit Parallel ADC with a Sequencer
AD7934BRU-REEL ADI

获取价格

 		4-Channel, 1.5 MSPS, 10-Bit and 12-Bit Parallel ADCs with a Sequencer
AD7934BRU-REEL ROCHESTER

获取价格

 		4-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDSO28, MO-153-AE, TSSOP-28
AD7934BRU-REEL7 ADI

获取价格

 		4-Channel, 1.5 MSPS, 10-Bit and 12-Bit Parallel ADCs with a Sequencer

与AD7934-6相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证