Touch Screen Digitizer
Data Sheet
AD7873
FEATURES
4-wire touch screen interface
FUNCTIONAL BLOCK DIAGRAM
+V
PENIRQ
CC
On-chip temperature sensor: −40°C to +85°C
On-chip 2.5 V reference
Direct battery measurement (0 V to 6 V)
Touch pressure measurement
PEN
INTERRUPT
TEMP
SENSOR
X+
X–
Specified throughput rate of 125 kSPS
Single supply, VCC of 2.2 V to 5.25 V
Ratiometric conversion
High speed serial interface
Programmable 8-bit or 12-bit resolution
One auxiliary analog input
AD7873
Y+
Y–
T/H
6-TO-1
I/P
MUX
AUX
COMP
BATTERY
MONITOR
Shutdown mode: 1 µA maximum
16-lead QSOP, TSSOP, and LFCSP packages
V
BAT
APPLICATIONS
V
REF
GND
Personal digital assistants
Smart hand-held devices
Touch screen monitors
Point-of-sale terminals
Pagers
CHARGE
REDISTRIBUTION
DAC
+V
CC
2.5V
REF
BUF
SAR + ADC
CONTROL LOGIC
GENERAL DESCRIPTION
The AD7873 is a 12-bit successive approximation ADC with a
synchronous serial interface and low on resistance switches for
driving touch screens. The AD7873 operates from a single 2.2 V
to 5.25 V supply, with a throughput rate of 125 kSPS.
SPORT
The AD7873 features direct battery measurement, temperature
measurement, and touch pressure measurement. The AD7873
also has an on-board reference of 2.5 V that can be used for the
auxiliary input, battery monitor, and temperature measurement
modes. When not in use, the internal reference can be shut
down to conserve power. An external reference can also be
applied and varied from 1 V to VCC with an analog input range
from 0 V to VREF. The device includes a shutdown mode that
reduces the current consumption to less than 1 µA.
DIN
DOUT
DCLK
BUSY
CS
Figure 1.
PRODUCT HIGHLIGHTS
1. Ratiometric conversion mode available, eliminating errors
due to on-board switch resistances.
2. On-board temperature sensor: −40°C to +85°C.
3. Battery monitor input.
4. Touch pressure measurement capability.
The AD7873 features on-board switches. This, coupled with low
power and high speed operation, makes the device ideal for
battery-powered systems with resistive touch screens. The part
is available in a 16-lead, 0.15 inch quarter size outline package
(QSOP), a 16-lead, thin shrink small outline package (TSSOP),
and a 16-lead, lead frame chip scale package (LFCSP).
5. Low power consumption of 1.37 mW maximum with the
reference off, or 2.41 mW typical with the reference on, at
125 kSPS and VCC at 3.6 V.
6. Package options include 4 mm × 4 mm LFCSP.
7. Analog input range from 0 V to VREF
8. Versatile serial I/O ports.
.
Rev. F
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2013 Analog Devices, Inc. All rights reserved.