LC2MOS
Signal Conditioning ADC
AD7712
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Charge Balancing ADC
24 Bits No Missing Codes
REF REF
DD IN (–) IN (+)
DV
V
BIAS
AV
REF OUT
DD
؎0.0015% Nonlinearity
High Level and Low Level Analog Input Channels
Programmable Gain for Both Inputs
Gains from 1 to 128
AV
DD
2.5V REFERENCE
4.5A
CHARGE-BALANCING A/D
CONVERTER
Differential Input for Low Level Channel
Low-Pass Filter with Programmable Filter Cutoffs
Ability to Read/Write Calibration Coefficients
Bidirectional Microcontroller Serial Interface
Internal/External Reference Option
Single- or Dual-Supply Operation
Low Power (25 mW typ) with Power-Down Mode
(100 W typ)
AIN1(+)
AIN1(–)
AUTO-ZEROED
DIGITAL
SYNC
M
U
X
PGA
A = 1 – 128
⌺–⌬
FILTER
MODULATOR
STANDBY
MCLK
IN
CLOCK
GENERATION
VOLTAGE
ATTENUATION
AIN2
TP
MCLK
OUT
SERIAL INTERFACE
CONTROL
REGISTER
OUTPUT
REGISTER
APPLICATIONS
AD7712
Process Control
Smart Transmitters
Portable Industrial Instruments
AGND DGND V
DRDY A0
MODE SDATA SCLK
RFS TFS
SS
GENERAL DESCRIPTION
The AD7712 is a complete analog front end for low frequency
measurement applications. The device has two analog input
channels and accepts either low level signals directly from a trans-
ducer or high level ( 4 ϫ VREF) signals, and outputs a serial
digital word. It employs a sigma-delta conversion technique to
realize up to 24 bits of no missing codes performance. The low
level input signal is applied to a proprietary programmable gain
front end based around an analog modulator. The high level
analog input is attenuated before being applied to the same
modulator. The modulator output is processed by an on-chip
digital filter. The first notch of this digital filter can be programmed
via the on-chip control register, allowing adjustment of the filter
cutoff and settling time.
port. The AD7712 also contains self-calibration, system calibra-
tion, and background calibration options, and allows the user to
read and to write the on-chip calibration registers.
CMOS construction ensures low power dissipation, and a hard-
ware programmable power-down mode reduces the standby power
consumption to only 100 µW typical. The part is available in a
24-lead, 0.3 inch wide, plastic and hermetic dual-in-line pack-
age (DIP), as well as a 24-lead small outline (SOIC) package.
PRODUCT HIGHLIGHTS
1. The low level analog input channel allows the AD7712 to
accept input signals directly from a strain gage or transducer,
removing a considerable amount of signal conditioning. To
maximize the flexibility of the part, the high level analog
input accepts signals of 4 ϫ VREF/GAIN.
Normally, one of the channels will be used as the main channel
with the second channel used as an auxiliary input to periodi-
cally measure a second voltage. The part can be operated from a
single supply (by tying the VSS pin to AGND), provided that the
input signals on the low level analog input are more positive
than –30 mV. By taking the VSS pin negative, the part can con-
vert signals down to –VREF on this low level input. This low level
input, as well as the reference input, features differential input
capability.
2. The AD7712 is ideal for microcontroller or DSP processor
applications with an on-chip control register that allows
control over filter cutoff, input gain, channel selection, signal
polarity, and calibration modes.
3. The AD7712 allows the user to read and to write the on-chip
calibration registers. This means that the microcontroller has
much greater control over the calibration procedure.
The AD7712 is ideal for use in smart, microcontroller based
systems. Input channel selection, gain settings, and signal polar-
ity can be configured in software using the bidirectional serial
4. No missing codes ensures true, usable, 23-bit dynamic range
coupled with excellent 0.0015% accuracy. The effects of
temperature drift are eliminated by on-chip self-calibration,
which removes zero-scale and full-scale errors.
REV. F
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© 2004 Analog Devices, Inc. All rights reserved.
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
替代型号
如果您发现信息不准确，
