16-Bit, 1.5 LSB INL, 250 kSPS PulSAR™
Differential ADC in MSOP/QFN
AD7687
APPLICATION DIAGRAM
FEATURES
16-bit resolution with no missing codes
Throughput: 250 kSPS
0.5V TO 5V
2.5 TO 5V
INL: ±0.4 LSB typ, ±1.5 LSB max (±23 ppm of FSR)
Dynamic range: 96.5 dB
S/(N + D): 95.5 dB @ 20 kHz
THD: −118 dB @ 20 kHz
True differential analog input range
±±REF
VREF
0
VIO
1.8V TO VDD
REF VDD
SDI
SCK
SDO
CNV
IN+
AD7687
3- OR 4-WIRE INTERFACE
(SPI, DAISY CHAIN, CS)
IN–
VREF
0
GND
0 ± to ±REF with ±REF up to ±DD on both inputs
No pipeline delay
Figure 2.
Single-supply 2.3 ± to 5.5 ± operation with
1.8 ±/2.5 ±/3 ±/5 ± logic interface
Serial interface SPI®/QSPI™/MICROWIRE™/DSP-compatible
Daisy-chain multiple ADCs and BUSY indicator
Power dissipation
Table 1. MSOP, QFN1 (LFCSP)/SOT-23 16-Bit PulSAR ADC
Type
100 kSPS
AD7684
AD7683
250 kSPS
AD7687
AD7685
AD7694
500 kSPS
AD7688
AD7686
True Differential
Pseudo
Differential/Unipolar
Unipolar
1.35 mW @ 2.5 ±/100 kSPS, 4 mW @ 5 ±/100 kSPS, and
1.4 µW @ 2.5 ±/100 SPS
AD7680
Standby current: 1 nA
GENERAL DESCRIPTION
10-lead MSOP (MSOP-8 size) and
3 mm × 3 mm QFN1 (LFCSP) (SOT-23 size)
Pin-for-pin compatible with AD7685, AD7686, and AD7688
The AD7687 is a 16-bit, charge redistribution, successive
approximation, analog-to-digital converter (ADC) that operates
from a single power supply, VDD, between 2.3 V to 5.5 V. It
contains a low power, high speed, 16-bit sampling ADC with no
missing codes, an internal conversion clock, and a versatile
serial interface port. The part also contains a low noise, wide
bandwidth, short aperture delay track-and-hold circuit. On the
CNV rising edge, it samples the voltage difference between IN+
and IN− pins. The voltages on these pins usually swing in
opposite phase between 0 V to REF. The reference voltage, REF,
is applied externally and can be set up to the supply voltage.
APPLICATIONS
Battery-powered equipment
Data acquisitions
Instrumentation
Medical instruments
Process controls
1.5
POSITIVE INL = +0.32LSB
NEGATIVE INL = –0.41LSB
1.0
Its power scales linearly with throughput.
The SPI-compatible serial interface also features the ability,
using the SDI input, to daisy-chain several ADCs on a single,
3-wire bus and provides an optional BUSY indicator. It is
compatible with 1.8 V, 2.5 V, 3 V, or 5 V logic, using the separate
supply VIO.
0.5
0
–0.5
The AD7687 is housed in a 10-lead MSOP or a 10-lead QFN1
(LFCSP) with operation specified from −40°C to +85°C.
–1.0
–1.5
0
16384
32768
CODE
49152
65535
1 QFN package in development. Contact sales for samples and availability.
Figure 1. Integral Nonlinearity vs. Code
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2005 Analog Devices, Inc. All rights reserved.