16-Bit, 250 kSPS PulSAR
ADC in MSOP/QFN
AD7685
APPLICATION DIAGRAM
FEATURES
0.5V TO VDD
2.5V TO 5V
16-bit resolution with no missing codes
Throughput: 250 kSPS
INL: 0.6 LSB typical, 2 LSB maximum ( 0.003% of FSR)
SINAD: 93.5 dB @ 20 kHz
THD: −110 dB @ 20 kHz
Pseudo differential analog input range
0 V to VREF with VREF up to VDD
VIO
1.8V TO VDD
REF VDD
0 TO VREF
SDI
SCK
SDO
CNV
IN+
AD7685
3- OR 4-WIRE INTERFACE
(SPI, DAISY CHAIN, CS)
IN–
GND
No pipeline delay
Single-supply operation 2.3 V to 5.5 V with
1.8 V to 5 V logic interface
Serial interface SPI®-/QSPI™-/MICROWIRE™-/DSP-compatible
Daisy-chain multiple ADCs, BUSY indicator
Power dissipation
1.4 μW @ 2.5 V/100 SPS
1.35 mW @ 2.5 V/100 kSPS, 4 mW @ 5 V/100 kSPS
Standby current: 1 nA
Figure 2.
Table 1. MSOP, QFN (LFCSP)/SOT-23
14-/16-/18-Bit PulSAR ADC
400 kSPS
to
500 kSPS kSPS
100
kSPS
250
1000
ADC
Driver
Type
kSPS
18-Bit True
Differential
16-Bit True
Differential
AD7691 AD7690
AD7982
AD7982 ADA4941
ADA4841
10-lead package: MSOP (MSOP-8 size) and
3 mm × 3 mm QFN (LFCSP) (SOT-23 size)
Pin-for-pin-compatible with 10-lead MSOP/QFN PulSAR® ADCs
AD7684 AD7687 AD7688
AD7693
ADA4941
ADA4841
16-Bit Pseudo AD7680 AD7685 AD7686
Differential AD7683 AD7694
AD7980 ADA4841
APPLICATIONS
14-Bit Pseudo AD7940 AD7942 AD7946
Differential
ADA4841
Battery-powered equipment
Medical instruments
Mobile communications
Personal digital assistants (PDAs)
Data acquisition
GENERAL DESCRIPTION
The AD7685 is a 16-bit, charge redistribution successive
Instrumentation
Process controls
approximation, analog-to-digital converter (ADC) that operates
from a single power supply, VDD, between 2.3 V to 5.5 V. It
contains a low power, high speed, 16-bit sampling ADC with no
missing codes, an internal conversion clock, and a versatile serial
interface port. The part also contains a low noise, wide bandwidth,
short aperture delay, track-and-hold circuit. On the CNV rising
edge, it samples an analog input IN+ between 0 V to REF with
respect to a ground sense IN−. The reference voltage, REF, is
applied externally and can be set up to the supply voltage.
2.0
POSITIVE INL = +0.33LSB
NEGATIVE INL = –0.50LSB
1.5
1.0
0.5
0
Power dissipation scales linearly with throughput.
–0.5
–1.0
–1.5
–2.0
The SPI-compatible serial interface also features the ability,
using the SDI input, to daisy chain several ADCs on a single
3-wire bus or provides an optional BUSY indicator. It is
compatible with 1.8 V, 2.5 V, 3 V, or 5 V logic using the
separate supply VIO.
0
16384
32768
CODE
49152
65536
The AD7685 is housed in a 10-lead MSOP or a 10-lead QFN
(LFCSP) with operation specified from −40°C to +85°C.
Figure 1. Integral Nonlinearity vs. Code.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2004–2011 Analog Devices, Inc. All rights reserved.