16-Bit, ؎1 LSB INL,
a
500 kSPS, Differential ADC
AD7676*
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Throughput: 500 kSPS
AVDD AGND REF REFGND
DVDD DGND
INL: ؎1 LSB Max (؎0.0015% of Full-Scale)
16 Bits Resolution with No Missing Codes
S/(N+D): 94 dB Typ @ 45 kHz
OVDD
OGND
AD7676
THD: –110 dB Typ @ 45 kHz
SERIAL
PORT
Differential Input Range: ؎2.5 V
Both AC and DC Specifications
No Pipeline Delay
Parallel (8/16 Bits) and Serial 5 V/3 V Interface
SPI™/QSPI™/MICROWIRE™/DSP Compatible
Single 5 V Supply Operation
67 mW Typical Power Dissipation, 15 W @ 100 SPS
Power-Down Mode: 7 W Max
Package: 48-Lead Quad Flat Pack (LQFP)
Pin-to-Pin Compatible with the AD7675
IN+
IN–
SWITCHED
CAP DAC
SER/PAR
BUSY
DATA[15:0]
CS
16
PARALLEL
INTERFACE
CLOCK
PD
CONTROL LOGIC AND
CALIBRATION CIRCUITRY
RD
RESET
OB/2C
BYTESWAP
CNVST
APPLICATIONS
CT Scanners
Data Acquisition
Instrumentation
Spectrum Analysis
Medical Instruments
Battery-Powered Systems
Process Control
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The AD7676 is a 16-bit, 500 kSPS, charge redistribution SAR,
fully differential analog-to-digital converter that operates from a
single 5 V power supply. The part contains a high-speed 16-bit
sampling ADC, an internal conversion clock, error correction
circuits, and both serial and parallel system interface ports.
1. Excellent INL
The AD7676 has a maximum integral nonlinearity of 1.0 LSB
with no missing 16-bit code.
2. Superior AC Performances
The AD7676 has a minimum dynamic of 92 dB, 94 dB typical.
The AD7676 is hardware factory calibrated and is comprehensively
tested to ensure such ac parameters as signal-to-noise ratio (SNR)
and total harmonic distortion (THD), in addition to the more
traditional dc parameters of gain, offset, and linearity.
3. Fast Throughput
The AD7676 is a 500 kSPS, charge redistribution, 16-bit
SAR ADC with internal error correction circuitry.
4. Single-Supply Operation
It is fabricated using Analog Devices’ high-performance, 0.6
micron CMOS process and is available in a 48-lead LQFP with
operation specified from –40°C to +85°C.
The AD7676 operates from a single 5 V supply and typically
dissipates only 67 mW. It consumes 7 µW maximum when in
power-down.
5. Serial or Parallel Interface
Versatile parallel (8 or 16 bits) or 2-wire serial interface
arrangement compatible with either 3 V or 5 V logic.
*Patent pending
SPI and QSPI are trademarks of Motorola Inc.
MICROWIRE is a trademark of National Semiconductor Inc.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2001