16-Bit, 100 kSPS,
Differential ADC
a
AD7675
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Throughput: 100 kSPS
AVDD AGND REF REFGND
DVDD DGND
INL: ꢀ1.5 LSB Max (ꢀ0.0015% of Full Scale)
16 Bits Resolution with No Missing Codes
S/(N+D): 94 dB Typ @ 45 kHz
OVDD
OGND
AD7675
THD: –110 dB Typ @ 45 kHz
Differential Input Range: ꢀ2.5 V
Both AC and DC Specifications
SERIAL
PORT
IN+
IN–
SWITCHED
CAP DAC
SER/PAR
BUSY
DATA[15:0]
CS
No Pipeline Delay
16
Parallel (8 Bits/16 Bits) and Serial 5 V/3 V Interface
SPI™/QSPI™/MICROWIRE™/DSP Compatible
Single 5 V Supply Operation
15 mW Typical Power Dissipation, 15 ꢁW @ 100 SPS
Power-Down Mode: 7 ꢁW Max
PARALLEL
INTERFACE
CLOCK
PD
CONTROL LOGIC AND
CALIBRATION CIRCUITRY
RD
RESET
OB/2C
BYTESWAP
Packages: 48-Lead Quad Flatpack (LQFP),
46-Lead Frame Chip Scale (LFCSP)
Pin-to-Pin Compatible with the AD7660
Replacement of AD676, AD677
CNVST
PulSAR Selection
APPLICATIONS
CT Scanners
Type/kSPS
100–250
500–570
1000
Pseudo
Differential
AD7660
AD7650
AD7664
Data Acquisition
Instrumentation
Spectrum Analysis
Medical Instruments
Battery-Powered Systems
Process Control
True Bipolar
AD7663
AD7665
AD7676
AD7671
AD7677
True Differential
AD7675
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The AD7675 is a 16-bit, 100 kSPS, charge redistribution SAR,
fully differential analog-to-digital converter that operates from a
single 5 V power supply. The part contains a high speed 16-bit
sampling ADC, an internal conversion clock, error correction
circuits, and both serial and parallel system interface ports.
1. Excellent INL
The AD7675 has a maximum integral nonlinearity of 1.5 LSB
with no missing 16-bit code.
2. Superior AC Performances
The AD7675 has a minimum dynamic of 92 dB, 94 dB typical.
The AD7675 is hardware factory calibrated and is comprehensively
tested to ensure such ac parameters as signal-to-noise ratio (SNR)
and total harmonic distortion (THD), in addition to the more
traditional dc parameters of gain, offset, and linearity.
3. Fast Throughput
The AD7675 is a 100 kSPS, charge redistribution, 16-bit
SAR ADC with internal error correction circuitry.
4. Single-Supply Operation
It is fabricated using Analog Devices’ high performance, 0.6
micron CMOS process and is available in a 48-lead LQFP or a
tiny 48-lead LFCSP with operation specified from –40°C to +85°C.
The AD7675 operates from a single 5 V supply and typically
dissipates only 17 mW. Its power dissipation decreases
with the throughput to, for instance, only 15 µW at a 100 SPS
throughput. It consumes 7 µW maximum when in power-down.
5. Serial or Parallel Interface
Versatile parallel (8 bits or 16 bits) or 2-wire serial interface
arrangement compatible with either 3 V or 5 V logic.
SPI and QSPI are trademarks of Motorola Inc.
MICROWIRE is a trademark of National Semiconductor Inc.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2002