AD7440BRT-R2

更新时间： 2024-02-16 12:33:38

品牌	Logo	应用领域
亚德诺 - ADI		转换器模数转换器光电二极管
页数	文件大小	规格书
28页	770K
描述
Differential Input, 1 MSPS 10-Bit and 12-Bit ADCs in an 8-Lead SOT-23

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

AD7440BRT-R2 技术参数

是否无铅：	不含铅	是否Rohs认证：	不符合
生命周期：	Obsolete	零件包装代码：	SOIC
包装说明：	MO-178BA, SOT-23, 8 PIN	针数：	8
Reach Compliance Code：	not_compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.58
Is Samacsys：	N	最大模拟输入电压：	2 V
最小模拟输入电压：	-2 V	最长转换时间：	0.889 µs
转换器类型：	ADC, SUCCESSIVE APPROXIMATION	JESD-30 代码：	R-PDSO-G8
JESD-609代码：	e0	长度：	2.9 mm
最大线性误差 (EL)：	0.0488%	湿度敏感等级：	1
模拟输入通道数量：	1	位数：	10
功能数量：	1	端子数量：	8
最高工作温度：	85 °C	最低工作温度：	-40 °C
输出位码：	2'S COMPLEMENT BINARY	输出格式：	SERIAL
封装主体材料：	PLASTIC/EPOXY	封装代码：	LSSOP
封装等效代码：	TSSOP8,.1	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	峰值回流温度（摄氏度）：	NOT SPECIFIED
电源：	3/5 V	认证状态：	Not Qualified
采样速率：	1 MHz	采样并保持/跟踪并保持：	TRACK
座面最大高度：	1.45 mm	子类别：	Analog to Digital Converters
标称供电电压：	3 V	表面贴装：	YES
温度等级：	INDUSTRIAL	端子面层：	Tin/Lead (Sn85Pb15)
端子形式：	GULL WING	端子节距：	0.65 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	1.6 mm	Base Number Matches：	1

AD7440BRT-R2 数据手册

Differential Input, 1 MSPS

10-Bit and 12-Bit ADCs in an 8-Lead SOT-23

AD7440/AD7450A

FUNCTIONAL BLOCK DIAGRAM

FEATURES

Fast throughput rate: 1 MSPS

Specified for V_DDof 3 V and 5 V

Low power at max throughput rate:

4 mW max at 1 MSPS with 3 V supplies

9.25 mW max at 1 MSPS with 5 V supplies

Fully differential analog input

Wide input bandwidth:

IN+

12-BIT

SUCCESSIVE

APPROXIMATION

ADC

T/H

IN–

REF

70 dB SINAD at 100 kHz input frequency

Flexible power/serial clock speed management

No pipeline delays

SCLK

SDATA

High speed serial interface:

AD7440/AD7450A

CONTROL LOGIC

SPI®/QSPI™/MICROWIRE™/DSP compatible

Power-down mode: 1 µA max

8-lead SOT-23 and MSOP packages

GND

APPLICATIONS

Figure 1.

Transducer interface

Battery-powered systems

Data acquisition systems

Portable instrumentation

Motor control

on the falling edge of ; the conversion is also initiated at this

point. The SAR architecture of these parts ensures that there are

no pipeline delays. The AD7440 and the AD7450A use ad-

vanced design techniques to achieve very low power dissipation

at high throughput rates.

PRODUCT HIGHLIGHTS

GENERAL DESCRIPTION

The AD7440/AD7450A¹are 10-bit and 12-bit high speed, low

power, successive approximation (SAR) analog-to-digital

converters with a fully differential analog input. These parts

operate from a single 3 V or 5 V power supply and use advanced

design techniques to achieve very low power dissipation at

throughput rates up to 1 MSPS. The SAR architecture of these

parts ensures that there are no pipeline delays.

1. Operation with either 3 V or 5 V power supplies.

2. High throughput with low power consumption.

With a 3 V supply, the AD7440/AD7450A offer 4 mW

max power consumption for 1 MSPS throughput.

3. Fully differential analog input.

4. Flexible power/serial clock speed management.

The conversion rate is determined by the serial clock,

allowing the power to be reduced as the conversion time

is reduced through the serial clock speed increase. These

parts also feature a shutdown mode to maximize power

efficiency at lower throughput rates.

The parts contain a low noise, wide bandwidth, differential

track-and-hold amplifier (T/H) that can handle input

frequencies up to 3.5 MHz. The reference voltage is applied

externally to the V_REFpin and can be varied from 100 mV to

3.5 V depending on the power supply and what suits the

application. The value of the reference voltage determines the

common-mode voltage range of the part. With this truly

differential input structure and variable reference input, the user

can select a variety of input ranges and bias points.

5. Variable voltage reference input.

6. No pipeline delay.

7. Accurate control of the sampling instant via a

once-off conversion control.

input and

8. ENOB > eight bits typically with 100 mV reference.

The conversion process and data acquisition are controlled

using

and the serial clock, allowing the device to interface

with microprocessors or DSPs. The input signals are sampled

¹Protected by U.S. Patent Number 6,681,332.

Rev. B

Information furnished by Analog Devices is believed to be accurate and reliable.

However, no responsibility is assumed by Analog Devices for its use, nor for any

infringements of patents or other rights of third parties that may result from its use.

Specifications subject to change without notice. No license is granted by implication

or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

Fax: 781.326.8703

www.analog.com

12 3 4 5 6 7...28

下载PDF

与AD7440BRT-R2相关器件

型号	品牌	描述	获取价格	数据表
AD7440BRT-REEL	ADI	IC 1-CH 10-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO8, SOT-23, 8 PIN, Analog t	获取价格
AD7440BRT-REEL7	ADI	Differential Input, 1 MSPS 10-Bit and 12-Bit ADCs in an 8-Lead SOT-23	获取价格
AD7440BRTZ-R2	ROCHESTER	1-CH 10-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO8, LEAD FREE, MO-178BA, SOT-2	获取价格
AD7440BRTZ-R22	ADI	Differential Input, 1 MSPS ADCs in an 8-Lead SOT-23	获取价格
AD7440BRTZ-REEL7	ROCHESTER	1-CH 10-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO8, LEAD FREE, MO-178BA, SOT-2	获取价格
AD7440BRTZ-REEL72	ADI	Differential Input, 1 MSPS ADCs in an 8-Lead SOT-23	获取价格

与AD7440BRT-R2相关文章

深入解析AD7606高性能多通道模数转换器：资料手册参数分析
2024-05-10

4
74HC573三态非易失锁存器(Latch)资料手册参数分析
2024-05-10

3
MAX3232 RS-232电平转换器资料手册参数分析
2024-05-10

4
MAX485 RS-485/RS-422收发器资料手册参数分析
2024-05-10

4

产品中心

服务支持

精选活动

关于我们

帮助中心

AD7440BRT-R2

AD7440BRT-R2 技术参数

AD7440BRT-R2 数据手册

与AD7440BRT-R2相关器件

与AD7440BRT-R2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

AD7440BRT-R2

AD7440BRT-R2 技术参数

AD7440BRT-R2 数据手册

与AD7440BRT-R2相关器件

与AD7440BRT-R2相关文章

您还可以找

您在本页遇到什么问题？