Data Sheet
AD74115
Single-Channel, Software Configurable Input and Output
FEATURES
FUNCTIONAL BLOCK DIAGRAM
► Single-channel software configurable input and output
► Multiple configurable modes to a single pin
► Voltage input
► Current input
► Voltage output
► Current output
► Digital input
► Digital output
► 2-wire, 3-wire, or 4-wire RTD measurements
► Thermocouple measurement
► Overvoltage tolerant on screw terminal facing pins, powered or
unpowered
► Auxiliary high voltage sense pins
Figure 1. Functional Block Diagram
► 10 ppm/°C reference temperature coefficient
► 16-bit, Σ-∆ ADC with optional 50 Hz and 60 Hz rejection
► 14-bit monotonic DAC
GENERAL DESCRIPTION
The AD74115 is a single-channel, software-configurable, input and
output device for industrial control applications. The AD74115 pro-
vides a wide range of use cases, integrated on a single chip. These
use cases include analog output, analog input, digital output, digital
input, resistance temperature detector (RTD), and thermocouple
measurement capability. A serial peripheral interface (SPI) is used
to handle all communications to the device. The digital input and
digital outputs can be accessed via the SPI or the general-purpose
input and output (GPIO) pins to support higher speed data rates.
► Unipolar and bipolar capability
► On-chip diagnostics including open-circuit and short-circuit de-
tection
► Internal temperature sensor, ±5°C accuracy
► SPI-compatible
► Wide power supply range
► Programmable power control
► Temperature range: −40°C to +105°C
► 48-lead LFCSP
The device features a 16-bit, Σ-Δ analog-to-digital converter (ADC)
and a 14-bit digital-to-analog converter (DAC). The AD74115 con-
tains a high accuracy 2.5 V on-chip reference that can be used as
the DAC and ADC reference.
APPLICATIONS
► Isolated industrial control systems
► Process control
► Factory automation
Power and isolation can be provided using the ADP1034 compan-
ion product. When using the ADP1034 and AD74115 together,
programmable power control (PPC) is available on the positive
analog supply, AVDD, which allows for an optimized power solution
in the end application. An on-chip charge pump can be enabled if
unipolar capability is required.
► Building control systems
COMPANION PRODUCTS
► Power and Data Isolation with PPC: ADP1034
► Voltage Reference: ADR4525
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT