Differential Input, Quad, Internal Reference
Simultaneous Sampling, 16-Bit SAR ADC
AD7389-4
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAM
V
REFOUT
REFCAP REFGND
V
LOGIC
CC
16-bit ADC family
Quad simultaneous sampling
Fully differential analog inputs
Wide common-mode range
High throughput rate: 2 MSPS
Buffered 2.5 V internal voltage reference (10 ppm/°C)
On-chip oversampling function
INL (maximum): 2 LSBs
SNR (typical)
90.5 dB at VREF = 2.5 V
97.9 dB at RES = 1, OSR = 8× rolling average oversampling
2-bit resolution boost
REGCAP
LDO
REF
A
A+
IN
OSC
ADC A
OVERSAMPLING
A
A–
IN
SDOA
SDOB
SDOC
A
B+
IN
OVERSAMPLING
OVERSAMPLING
OVERSAMPLING
ADC B
ADC C
A
B–
IN
INTERFACE
AND
CONTROL
LOGIC
SDOD/
ALERT
A
C+
IN
A
C–
SCLK
SDI
IN
CS
A
D+
IN
ADC D
GND
ALERT
Out of range indicator (
)
AD7389-4
A
D–
IN
High-speed serial interface
−40°C to +125°C operation
4 mm × 4 mm, 24-lead LFCSP
GND
Figure 1.
APPLICATIONS
Motor control position feedback
Motor control current sense
Data acquisition systems
Erbium doped fiber amplifier (EDFA) applications
In phase and quadrature demodulation
GENERAL DESCRIPTION
The AD7389-4 a 16-bit, quad, simultaneous sampling, high
speed, successive approximation register (SAR), analog-to-digital
converter (ADC) that operates from a 3.0 V to 3.6 V power
supply and features throughput rates up to 2 MSPS. The analog
input type is differential, accepts a wide common-mode input
voltage, and the analog inputs are sampled and converted on
Table 1. Related Devices
No. of
Channels Input Type
16 Bits
14 Bits
12 Bits
4
2
Differential
AD7380-4 AD7381-4
AD7389-4
Differential
AD7380
AD4680
AD4681
AD7381
CS
the falling edge of
.
The AD7389-4 has on-chip oversampling blocks to improve
dynamic range and reduce noise at lower bandwidths. The
oversampling can boost up to two bits of added resolution. A
buffered internal 2.5 V reference (10 ppm/°C) is included.
Single-ended AD7386
AD7387
AD7388
PRODUCT HIGHLIGHTS
1. Quad simultaneous sampling and conversion.
2. Pin-compatible product family.
3. High throughput rate, 2 MSPS at 16-bit.
4. Space-saving, 4 mm × 4 mm LFCSP.
5. Integrated oversampling block to increase dynamic range,
reduce noise and reduce SCLK speed requirements.
6. Differential analog inputs with wide common-mode range.
7. Small sampling capacitor reduces amplifier drive burden.
The conversion process and data acquisition use standard
control inputs allowing for easy interfacing to microprocessors
or digital signal processors (DSPs). The conversion result can
clock out simultaneously via 4-wire mode for faster throughput or
via 1-wire serial mode when slower throughput is allowed. The
device is compatible with 1.8 V, 2.5 V, and 3.3 V interfaces,
using the separate logic supply.
The AD7389-4 is available in a 24-lead lead frame chip scale
package (LFCSP) with operation specified from −40°C to +125°C.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice.
No license is granted by implication or otherwise under any patent or patent rights of Analog
Devices. Trademarks and registeredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2022 Analog Devices, Inc. All rights reserved.
www.analog.com