Data Sheet
AD7383-4/AD7384-4
Pseudo Differential Input, Quad, 4 MSPS Simultaneous Sampling, 16-Bit/14-Bit,
SAR ADC
FEATURES
FUNCTIONAL BLOCK DIAGRAM
► 16-bit and 14-bit ADC family
► Quad simultaneous sampling
► Pseudo differential analog inputs
► High throughput rate: 4 MSPS
► SNR: 86.7 dB (typical) at VREF = 3.3 V (AD7383-4)
► On-chip oversampling function
► SNR: 91 dB (typical) with OSR = 8×, RES = 1
► 2-bit resolution boost
► Out of range indicator (ALERT)
► INL: 3.8 LSBs (maximum)
► High speed serial interface
► Temperature range: −40°C to +125°C
► 24-lead, 4 mm × 4 mm LFCSP
Figure 1. Functional Block Diagram
GENERAL DESCRIPTION
APPLICATIONS
The 16-bit AD7383-4 and 14-bit AD7384-4 are pin-compatible,
quad, simultaneous sampling, high speed, successive approxima-
tion register (SAR), analog-to-digital converters (ADCs) operating
from a 3.0 V to 3.3 V power supply with throughput rates up to
4 MSPS. The analog input type is a pseudo differential and is
sampled and converted on the falling edge of CS.
► Motor control position feedback
► Motor control current sense
► Data acquisition systems
► Erbium-doped fiber amplifier (EDFA) applications
► Inphase and quadrature demodulation
The AD7383-4/AD7384-4 have on-chip oversampling blocks to
improve dynamic range and reduce noise at lower bandwidths. The
oversampling boosts up to two bits of added resolution. A buffered
internal 2.5 V reference is included. Alternatively, an external refer-
ence up to 3.3 V can be used.
PRODUCT HIGHLIGHTS
1. Quad simultaneous sampling and conversion.
2. Pin-compatible product family.
3. High 4 MSPS throughput rate.
The conversion process and data acquisition use standard control
inputs allowing easy interfacing to microprocessors or digital signal
processors (DSPs). The conversion result can clock out simultane-
ously via 4-wire mode for faster throughput or via 1-wire serial
mode when slower throughput is allowed. The devices are compati-
ble with 1.8 V, 2.5 V, and 3.3 V interfaces using the separate logic
supply.
4. Space-saving 4 mm × 4 mm LFCSP.
5. Integrated oversampling block to increase dynamic range, re-
duce noise, and reduce SCLK speed requirements.
6. Pseudo differential analog inputs.
7. Small sampling capacitor reduces amplifier drive burden.
The AD7383-4/AD7384-4 are available in a 24-lead, 4 mm × 4 mm
LFCSP and a temperature range of −40°C to +125°C.
Table 1. Related Devices
No. of
Channels
Input Type
16 Bits
14 Bits
12 Bits
4
Differential
AD7380-4
AD7389-4
AD7380
AD4680
AD4681
AD7386
AD7381‑4
2
Differential
AD7381
AD7387
Single-ended
AD7388
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT