Dual, 10-Bit nanoDAC
with 2 ppm/°C Reference, SPI Interface
Data Sheet
AD5313R
FEATURES
FUNCTIONAL BLOCK DIAGRAM
VDD
VREF
GND
Low drift 2.5 V reference: 2 ppm/°C typical
Tiny package: 3 mm × 3 mm, 16-lead LFCSP
Total unadjusted error (TUE): 0.1% of FSR maximum
AD5313R
VLOGIC
SCLK
2.5V
REFERENCE
INPUT
DAC
STRING
DAC A
Offset error: 1.5 mV maximum
V
OUTA
REGISTER
REGISTER
SYNC
SDIN
BUFFER
BUFFER
Gain error: 0.1% of FSR maximum
High drive capability: 20 mA, 0.5 V from supply rails
User selectable gain of 1 or 2 (GAIN pin)
Reset to zero scale or midscale (RSTSEL pin)
1.8 V logic compatibility
50 MHz SPI with readback or daisy chain
Low glitch: 0.5 nV-sec
Robust 4 kV HBM and 1.5 kV FICDM ESD ratings
Low power: 3.3 mW at 3 V
STRING
DAC B
INPUT
REGISTER
DAC
REGISTER
VOUT
B
SDO
POWER-ON
RESET
GAIN =
×1/×2
POWER-
DOWN
LOGIC
LDAC RESET
RSTSEL
GAIN
Figure 1.
2.7 V to 5.5 V power supply
−40°C to +105°C temperature range
APPLICATIONS
Optical transceivers
Base station power amplifiers
Process control (PLC I/O cards)
Industrial automation
Data acquisition systems
GENERAL DESCRIPTION
Table 1. Related Devices
Interface
Reference
Internal
External
Internal
External
12-Bit
10-Bit
N/A
AD53131
AD5338R1
AD53381
The AD5313R, a member of the nanoDAC® family, is a low power,
dual, 10-bit buffered voltage output digital-to-analog converter
(DAC). The device includes a 2.5 V, 2 ppm/°C internal reference
(enabled by default) and a gain select pin giving a full-scale output
of 2.5 V (gain = 1) or 5 V (gain = 2). The AD5313R operates
from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by
design, and exhibits less than 0.1% FSR gain error and 1.5 mV
offset error performance. The device is available in a 3 mm ×
3 mm LFCSP package and a TSSOP package.
SPI
AD5687R
AD5687
AD5697R
N/A
I2C
1 The AD5313R and the AD5313 are not pin-to-pin or software compatible;
likewise, the AD5338R and the AD5338 are not pin-to-pin or software
compatible.
PRODUCT HIGHLIGHTS
The AD5313R also incorporates a power-on reset circuit and
a RSTSEL pin that ensures that the DAC outputs power up to
zero scale or midscale and remain there until a valid write occurs.
The part contains a per channel power-down feature that reduces
the current consumption of the device to 4 µA at 3 V while in
power-down mode.
1. Precision DC Performance.
Total unadjusted error: 0.1% of FSR maximum
Offset error: 1.5 mV maximum
Gain error: 0.1% of FSR maximum
2. Low Drift 2.5 V On-Chip Reference.
2 ppm/°C typical temperature coefficient
5 ppm/°C maximum temperature coefficient
3. Two Package Options.
The AD5313R employs a versatile serial peripheral interface
(SPI) that operates at clock rates up to 50 MHz, and the device
contains a VLOGIC pin that is intended for 1.8 V/3 V/5 V logic.
3 mm × 3 mm, 16-lead LFCSP
16-lead TSSOP
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2013 Analog Devices, Inc. All rights reserved.
www.analog.com