2.5 V to 5.5 V, 230 μA, Dual Rail-to-Rail,
Voltage Output 8-/10-/12-Bit DACs
AD5302/AD5312/AD5322
GENERAꢀ DESCRIPTION
FEATURES
AD5302: Two 8-bit buffered DACs in 1 package
A version: 1 ꢀSB INꢀ, B version: 0.5 ꢀSB INꢀ
AD5312: Two 10-bit buffered DACs in 1 package
A version: 4 ꢀSB INꢀ, B version: 2 ꢀSB INꢀ
AD5322: Two 12-bit buffered DACs in 1 package
A version: 16 ꢀSB INꢀ, B version: 8 ꢀSB INꢀ
10-lead MSOP
The AD5302/AD5312/AD5322 are dual 8-, 10-, and 12-bit
buffered voltage output DACs in a 10-lead MSOP that operate
from a single 2.5 V to 5.5 V supply, consuming 230 μA at 3 V.
Their on-chip output amplifiers allow the outputs to swing rail-
to-rail with a slew rate of 0.7 V/μs. The AD5302/AD5312/AD5322
utilize a versatile 3-wire serial interface that operates at clock
rates up to 30 MHz and is compatible with standard SPI®,
QSPI™, MICROWIRE™, and DSP interface standards.
Micropower operation: 300 μA @ 5 V (including
reference current)
The references for the two DACs are derived from two reference
pins (one per DAC). The reference inputs can be configured as
buffered or unbuffered inputs. The outputs of both DACs can be
Power-down to 200 nA @ 5 V, 50 nA @ 3 V
2.5 V to 5.5 V power supply
Double-buffered input logic
LDAC
updated simultaneously using the asynchronous
input.
Guaranteed monotonic by design over all codes
Buffered/Unbuffered reference input options
0 V to VREF output voltage
The parts incorporate a power-on reset circuit, which ensures
that the DAC outputs power-up to 0 V and remain there until a
valid write takes place to the device. The parts contain a power-
down feature that reduces the current consumption of the
devices to 200 nA at 5 V (50 nA at 3 V) and provides software-
selectable output loads while in power-down mode.
Power-on-reset to 0 V
Simultaneous update of DAC outputs via ꢀDAC
ꢀow power serial interface with Schmitt-triggered inputs
On-chip rail-to-rail output buffer amplifiers
Qualified for automotive applications
The low power consumption of these parts in normal operation
makes them ideally suited for portable battery-operated
equipment. The power consumption is 1.5 mW at 5 V, 0.7 mW
at 3 V, reducing to 1 μW in power-down mode.
APPꢀICATIONS
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
FUNCTIONAꢀ BꢀOCK DIAGRAM
V
V
A
DD
REF
POWER-ON
RESET
AD5302/AD5312/AD5322
INPUT
REGISTER
DAC
REGISTER
STRING
DAC
V
OUT
A
BUFFER
SYNC
SCLK
DIN
INTERFACE
LOGIC
POWER-DOWN
LOGIC
RESISTOR
NETWORK
INPUT
REGISTER
DAC
REGISTER
STRING
DAC
V
OUT
B
BUFFER
RESISTOR
NETWORK
V
B
GND
LDAC
REF
Figure 1.
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 © 2006-2011 Analog Devices, Inc. All rights reserved.