5秒后页面跳转
AD515A PDF预览

AD515A

更新时间: 2024-11-22 22:05:23
品牌 Logo 应用领域
亚德诺 - ADI 运算放大器
页数 文件大小 规格书
6页 208K
描述
Monolithic Precision, Low Power FET-Input Electrometer Op Amp

AD515A 数据手册

 浏览型号AD515A的Datasheet PDF文件第2页浏览型号AD515A的Datasheet PDF文件第3页浏览型号AD515A的Datasheet PDF文件第4页浏览型号AD515A的Datasheet PDF文件第5页浏览型号AD515A的Datasheet PDF文件第6页 
Monolithic Precision, Low Power  
FET-Input Electrometer Op Amp  
a
AD515A  
FEATURES  
PIN CONFIGURATION  
Ultralow Bias Current: 75 fA max (AD515AL)  
Ultralow Bias Current: 150 fA max (AD515AK)  
Ultralow Bias Current: 300 fA max (AD515AJ)  
Low Power: 1.5 mA max Quiescent Current  
Low Power: (0.6 mA typ)  
Low Offset Voltage: 1.0 mV max (AD515AK & L)  
Low Drift: 15 V/؇C max (AD515AK)  
Low Noise: 4 V p-p, 0.1 Hz to 10 Hz  
PRODUCT DESCRIPTION  
The AD515A is a monolithic FET-input operational amplifier  
with a guaranteed maximum input bias current of 75 fA  
(AD515AL). The AD515A is a monolithic successor to the  
industry standard AD515 electrometer, and will replace the  
AD515 in most applications. The AD515A also delivers laser-  
trimmed offset voltage, low drift, low noise and low power, a  
combination of features not previously available in ultralow bias  
current circuits. All devices are internally compensated, protected  
against latch-up and are short circuit protected.  
PRODUCT HIGHLIGHTS  
1. The AD515A provides subpicoampere bias currents in an  
integrated circuit amplifier.  
• The ultralow input bias currents are specified as the maxi-  
mum measured at either input with the device fully warmed  
up on ±15 V supplies at +25°C ambient with no heat sink.  
This parameter is 100% tested.  
• By using ±5 V supplies, input bias current can typically be  
brought below 50 fA.  
The AD515A’s combination of low input bias current, low  
offset voltage and low drift optimizes it for a wide variety of  
electrometer and very high impedance buffer applications  
including photocurrent detection, vacuum ion-gage measure-  
ment, long-term precision integration and low drift sample/hold  
applications. This amplifier is also an excellent choice for all forms  
of biomedical instrumentation such as pH/pIon sensitive elec-  
trodes, very low current oxygen sensors, and high impedance  
biological microprobes. In addition, the low cost and pin  
compatibility of the AD515A with standard FET op amps will  
allow designers to upgrade the performance of present systems  
at little or no additional cost. The 1015 common-mode input  
impedance ensures that the input bias current is essentially  
independent of common-mode voltage.  
2. The input offset voltage on all grades is laser trimmed, typically  
less than 500 µV.  
• The offset voltage drift is 15 µV/°C maximum on the  
K grade.  
• If additional pulling is desired, the amount required will  
have a minimal effect on offset drift (approximately 3 µV/°C  
per mV).  
3. The low quiescent current drain of 0.6 mA typical and  
1.5 mA maximum, keeps self-heating effects to a minimum  
and renders the AD515A suitable for a wide range of remote  
probe applications.  
As with previous electrometer amplifier designs from Analog  
Devices, the case is brought out to its own connection (Pin 8)  
so it can be independently connected to a point at the same  
potential as the input, thus minimizing stray leakage to the case.  
This feature will also shield the input circuitry from external  
noise and supply transients.  
4. The combination of low input noise voltage and very low  
input noise current is such that for source impedances from  
1M to 1011 , the Johnson noise of the source will easily  
dominate the noise characteristic.  
The AD515A is available in three versions of bias current and  
offset voltage, the “J”, “K” and “L”; all are specified for rated  
performance from 0°C to +70°C and supplied in a hermetically  
sealed TO-99 package.  
REV. A  
Information furnished by Analog Devices is believed to be accurate and  
reliable. However, no responsibility is assumed by Analog Devices for its  
use, nor for any infringements of patents or other rights of third parties  
which may result from its use. No license is granted by implication or  
otherwise under any patent or patent rights of Analog Devices.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 617/329-4700  
Fax: 617/326-8703  
World Wide Web Site: http://www.analog.com  
© Analog Devices, Inc., 1997  

与AD515A相关器件

型号 品牌 获取价格 描述 数据表
AD515AJ ADI

获取价格

Monolithic Precision, Low Power FET-Input Electrometer Op Amp
AD515AJH ADI

获取价格

Monolithic Precision, Low Power FET-Input Electrometer Op Amp
AD515AJH/+ ETC

获取价格

Voltage-Feedback Operational Amplifier
AD515AK ADI

获取价格

Monolithic Precision, Low Power FET-Input Electrometer Op Amp
AD515AKH ADI

获取价格

Monolithic Precision, Low Power FET-Input Electrometer Op Amp
AD515AKH/+ ETC

获取价格

Voltage-Feedback Operational Amplifier
AD515AL ADI

获取价格

Monolithic Precision, Low Power FET-Input Electrometer Op Amp
AD515ALH ADI

获取价格

Monolithic Precision, Low Power FET-Input Electrometer Op Amp
AD515JH ADI

获取价格

AD515JH
AD515JH/+ ETC

获取价格

Operational Amplifier