SigmaDSP™
3-Channel, 26-Bit
Signal Processing DAC
Graphical Custom ProgrammingTools
5V 3-Channel Audio DAC System
44-Lead MQFP or 48-Lead LQFP Plastic Package
Accepts Sample Rates up to 48 kHz
7 Biquad Filter Sections per Channel
Dual Dynamic Processor with Arbitrary Input/Output Curve
and AdjustableTime Constants
0 ms to 6 msVariable Delay/Channel for Speaker Alignment
Stereo Spreading Algorithm for Phat Stereo™ Effect
Program RAM Allows Complete New Program Download
2.0/2.1 Channel Audio Systems (Two Main Channels plus
Subwoofer)
Automotive Sound Systems
Minicomponent Stereo
HomeTheater Systems (AC-3 Postprocessor)
In-Seat Sound Systems (Aircraft, Motor Coaches)
Parameter RAM Allows Complete Control of MoreThan
200 Parameters via SPI Port
SPI Port Features Safe-Upload Mode forTransparent Filter
Updates
2 Control Registers Allow Complete Control of Modes and
MemoryTransfers
Differential Output for Optimum Performance
112 dB Signal-to-Noise (Not Muted) at 48 kHz Sample Rate
(A-Weighted Stereo)
The AD1954 is a complete 26-bit single-chip 3-channel digital
audio playback system with built-in DSP functionality for speaker
equalization, dual-band compression/limiting, delay compensa-
tion, and image enhancement.These algorithms can be used to
compensate for real-world limitations of speakers, amplifiers, and
listening environments, resulting in a dramatic improvement of
perceived audio quality.
70 dB Stop-Band Attenuation
On-Chip ClicklessVolume Control
The signal processing used in the AD1954 is comparable to that
found in high-end studio equipment. Most of the processing is
done in full 48-bit double-precision mode, resulting in very good
low-level signal performance and the absence of limit cycles or
idle tones.The compressor/limiter uses a sophisticated two-band
algorithm often found in high-end broadcast compressors.
Hardware and Software Controllable Clickless Mute
Digital De-emphasis Processing for 32 kHz, 44.1 kHz, and
48 kHz Sample Rates
Flexible Serial Data Port with Right-Justified, Left-Justified,
I
2S Compatible, and DSP Serial Port Modes
Auxiliary Digital Input
SERIAL DATA
OUTPUT
3
3
AD1954
26 22
DSP CORE
3
3
AUDIO DATA
MUX
SERIAL DATA
INPUTS
DAC – L
DAC – R
DATA FORMAT:
3.23 (SINGLE PRECISION)
3.45 (DOUBLE PRECISION)
MASTER CLOCK
OUTPUT
ANALOG
OUTPUTS
MCLK
GENERATOR
MASTER
CLOCK INPUTS
MCLK
MUX
DAC – SW
(256f /512f )
S
S
AUX SERIAL
DATA INPUT
DATA CAPTURE
OUT
DIGITAL
OUTPUT
SPI DATA
OUTPUT
SERIAL CONTROL
INTERFACE
3
SPI INPUT
RAM
ROM
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed byAnalog Devices for its
use, nor for any infringements of patents or other rights of third parties
that may result from its use. No license is granted by implication or other-
wise under any patent or patent rights ofAnalog Devices.Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© 2003 Analog Devices, Inc. All rights reserved.