5秒后页面跳转
ADP1875ARQZ-1.0-R7 PDF预览

ADP1875ARQZ-1.0-R7

更新时间: 2024-01-30 15:36:21
品牌 Logo 应用领域
亚德诺 - ADI 稳压器开关式稳压器或控制器电源电路开关式控制器光电二极管输出元件
页数 文件大小 规格书
44页 2455K
描述
Synchronous Buck Controller with Constant On-Time and Valley Current Mode

ADP1875ARQZ-1.0-R7 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SSOP
包装说明:SSOP, SSOP16,.25针数:16
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.73
Is Samacsys:N其他特性:ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V
模拟集成电路 - 其他类型:SWITCHING CONTROLLER控制模式:CURRENT-MODE
控制技术:PULSE WIDTH MODULATION最大输入电压:20 V
最小输入电压:3.25 V标称输入电压:12 V
JESD-30 代码:R-PDSO-G16JESD-609代码:e3
长度:4.9 mm湿度敏感等级:1
功能数量:1端子数量:16
最高工作温度:125 °C最低工作温度:-40 °C
标称输出电压:5 V封装主体材料:PLASTIC/EPOXY
封装代码:SSOP封装等效代码:SSOP16,.25
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, SHRINK PITCH
峰值回流温度(摄氏度):260认证状态:Not Qualified
座面最大高度:1.75 mm子类别:Switching Regulator or Controllers
表面贴装:YES切换器配置:PUSH-PULL
最大切换频率:1000 kHz温度等级:AUTOMOTIVE
端子面层:MATTE TIN端子形式:GULL WING
端子节距:0.64 mm端子位置:DUAL
处于峰值回流温度下的最长时间:30宽度:3.91 mm
Base Number Matches:1

ADP1875ARQZ-1.0-R7 数据手册

 浏览型号ADP1875ARQZ-1.0-R7的Datasheet PDF文件第2页浏览型号ADP1875ARQZ-1.0-R7的Datasheet PDF文件第3页浏览型号ADP1875ARQZ-1.0-R7的Datasheet PDF文件第4页浏览型号ADP1875ARQZ-1.0-R7的Datasheet PDF文件第5页浏览型号ADP1875ARQZ-1.0-R7的Datasheet PDF文件第6页浏览型号ADP1875ARQZ-1.0-R7的Datasheet PDF文件第7页 
Synchronous Buck Controller with Constant  
On-Time and Valley Current Mode  
ADP1874/ADP1875  
FEATURES  
TYPICAL APPLICATIONS CIRCUIT  
V
= 2.95V TO 20V  
IN  
Power input voltage range: 2.95 V to 20 V  
On-board bias regulator  
Minimum output voltage: 0.6 V  
VIN  
C
C
ADP1874/  
ADP1875  
C
IN  
C
C2  
0.6 V reference voltage with 1.0% accuracy  
Supports all N-channel MOSFET power stages  
Available in 300 kHz, 600 kHz, and 1.0 MHz options  
No current-sense resistor required  
R
C
COMP  
BST  
DRVH  
SW  
C
Q1  
BST  
10k  
L
VREG  
EN  
FB  
V
R
OUT  
TOP  
V
OUT  
C
Q2  
OUT  
R
LOAD  
BOT  
Power saving mode (PSM) for light loads (ADP1875 only)  
Resistor programmable current limit  
Power good with internal pull-up resistor  
Externally programmable soft start  
Thermal overload protection  
GND  
DRVL  
C
VREG2  
R
PGD  
VREG  
PGOOD  
V
EXT  
C
VREG  
VREG_IN  
RES  
SS  
C
SS  
R
TRK2  
R
RES  
TRACK  
PGND  
V
MASTER  
R
TRK1  
Short-circuit protection  
Standalone precision enable input  
Integrated bootstrap diode for high-side drive  
Starts into a precharged output  
Figure 1. Typical Applications Circuit  
100  
95  
90  
85  
80  
75  
70  
65  
60  
55  
50  
45  
40  
35  
30  
25  
Available in a 16-lead QSOP package  
V
= 5V (PSM)  
IN  
APPLICATIONS  
Telecom and networking systems  
Mid- to high-end servers  
Set-top boxes  
V
= 16.5V  
IN  
V
= 13V  
DSP core power supplies  
IN  
V
= 13V (PSM)  
IN  
GENERAL DESCRIPTION  
T
= 25°C  
A
V
= 1.8V  
OUT  
= 300kHz  
The ADP1874/ADP1875 are versatile current mode, synchronous  
step-down controllers. They provide superior transient response,  
optimal stability, and current-limit protection by using a constant  
on-time, pseudo fixed frequency with a programmable current  
limit, current control scheme. In addition, these devices offer  
optimum performance at low duty cycles by using a valley, current  
mode control architecture. This allows the ADP1874/ADP1875  
to drive all N-channel power stages to regulate output voltages  
to as low as 0.6 V.  
f
SW  
V
= 16.5V (PSM)  
IN  
WÜRTH INDUCTOR:  
744325120, L = 1.2µH, DCR = 1.8m  
INFINEON FETs:  
BSC042N03MS G (UPPER/LOWER)  
10  
100  
1k  
10k  
100k  
LOAD CURRENT (mA)  
Figure 2. ADP1874/ADP1875 Efficiency vs. Load Current (VOUT = 1.8 V, 300 kHz)  
In addition, soft start programmability is included to limit input in-  
rush current from the input supply during startup and to  
provide reverse current protection during precharged output  
conditions. The low-side current sense, current gain scheme, and  
integration of a boost diode, along with the PSM/forced pulse-  
width modulation (PWM) option, reduce the external part count  
and improve efficiency.  
The ADP1875 is the power saving mode (PSM) version of  
the device and is capable of pulse skipping to maintain output  
regulation while achieving improved system efficiency at light  
loads (see the ADP1875 Power Saving Mode (PSM) section for  
more information).  
The ADP1874/ADP1875 operate over the −40°C to +125°C  
junction temperature range and are available in a 16-lead QSOP  
package.  
Available in three frequency options (300 kHz, 600 kHz, and  
1.0 MHz, plus the PSM option), the ADP1874/ADP1875 are well  
suited for a wide range of applications that require a single-input  
power supply range from 2.95 V to 20 V. Low voltage biasing is  
supplied via a 5 V internal low dropout regulator (LDO).  
Rev. 0  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2011 Analog Devices, Inc. All rights reserved.  
 

与ADP1875ARQZ-1.0-R7相关器件

型号 品牌 描述 获取价格 数据表
ADP1876 ADI 600 kHz Dual Output Synchronous Buck

获取价格

ADP1876ACPZ-R7 ADI 600 kHz Dual Output Synchronous Buck

获取价格

ADP1876-EVALZ ADI 600 kHz Dual Output Synchronous Buck

获取价格

ADP1877 ADI Dual Output Synchronous Buck PWM Controller With Tracking

获取价格

ADP1877ACPZ-R7 ADI Dual Output Synchronous Buck PWM Controller With Tracking

获取价格

ADP1877HC-EVALZ ADI Dual Output Synchronous Buck PWM Controller With Tracking

获取价格