ADP1621

更新时间： 2024-02-25 23:19:39

品牌	Logo	应用领域
亚德诺 - ADI		控制器
页数	文件大小	规格书
32页	777K
描述
Constant-Frequency, Current-Mode Step-Up DC/DC Controller

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ADP1621 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	TSSOP
包装说明：	TSSOP, TSSOP10,.19,20	针数：	10
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.21
模拟集成电路 - 其他类型：	SWITCHING CONTROLLER	控制模式：	CURRENT-MODE
控制技术：	PULSE WIDTH MODULATION	最大输入电压：	5.5 V
最小输入电压：	2.9 V	标称输入电压：	5 V
JESD-30 代码：	S-PDSO-G10	JESD-609代码：	e3
长度：	3 mm	功能数量：	1
端子数量：	10	最高工作温度：	125 °C
最低工作温度：	-40 °C	最大输出电流：	0.012 A
封装主体材料：	PLASTIC/EPOXY	封装代码：	TSSOP
封装等效代码：	TSSOP10,.19,20	封装形状：	SQUARE
封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	峰值回流温度（摄氏度）：	260
认证状态：	Not Qualified	座面最大高度：	1.1 mm
子类别：	Switching Regulator or Controllers	表面贴装：	YES
切换器配置：	SINGLE	最大切换频率：	1500 kHz
温度等级：	AUTOMOTIVE	端子面层：	MATTE TIN
端子形式：	GULL WING	端子节距：	0.5 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	40
宽度：	3 mm	Base Number Matches：	1

ADP1621 数据手册

Constant-Frequency, Current-Mode

Step-Up DC/DC Controller

ADP1621

FEATURES

92% efficiency (no sense resistor required)

TYPICAL APPLICATION CIRCUIT

_IN= 3.3V

1.0% initial accuracy

4.7µH

IC supply voltage range: 2.9 V to 5.5 V

Power-input voltage as low as 1.0 V

Capable of high supply input voltage (>5.5 V)

with an external NPN or a resistor

_OUT= 5V

1µF

10V

0.1µF

10V

R_S

80Ω

35.7kΩ

C_OUT1C_OUT2C_OUT3

1µF

10V

10µF

150µF

6.3V

×2

10V

V_INUVLO and 35 mA shunt regulator

ADP1621

11.5kΩ

External slope compensation with 1 resistor

Programmable operating frequency

(100 kHz to 1.5 MHz) with 1 resistor

Lossless current sensing for switch-node voltage <30 V

Resistor current sensing for switch-node voltage >30 V

Synchronizable to external clock

SDSN

COMP

FREQ

GATE

PGND

R_COMP

9.09kΩ

120pF

GND

C_COMP

1.8nF

47µF

6.3V

R_FREQ

31.6kΩ

Current-mode operation for excellent line and load transient

responses

10 μA shutdown current

Current limit and thermal overload protection

Soft start in 2048 clock cycles

AGND

_OSC= 600kHz

C1 = MURATA GRM31CR60J476M

_OUT3= SANYO POSCAP 6TPE150M

L1 = TOKO FDV0630-4R7M

M1 = VISHAY Si7882DP

D1 = VISHAY SSA33L

Figure 1. High Efficiency Output Boost Converter in Lossless Mode,

3.3 V Input, 5 V Output (Bootstrapped)

APPLICATIONS

APD bias

Portable electronic equipment

Isolated dc/dc converter

Step-up/step-down dc/dc converter

LED driver for laptop computer and navigation system

LCD backlighting

100

GENERAL DESCRIPTION

The ADP1621 is a fixed-frequency, pulse-width modulation

(PWM), current-mode, step-up converter controller. It drives an

external n-channel MOSFET to convert the input voltage to a

higher output voltage. The ADP1621 can also be used to drive

flyback, SEPIC, and forward converter topologies, either isolated

or nonisolated.

0.01

0.1

LOAD CURRENT (A)

Figure 2. Efficiency of Circuit Shown in Figure 1

The ADP1621 eliminates the use of a current-sense power

resistor by measuring the voltage drop across the on resistance

of the n-channel MOSFET. This technique, allowed up to a

maximum voltage of 30 V at the switch node, maximizes

efficiency and reduces cost. For switch-node voltages higher than

30 V or for more accurate current limiting, the CS pin can be

connected to a current-sense resistor in the source of the MOSFET.

The slope compensation is implemented by an external resistor,

allowing a wide range of external components (inductors and

MOSFETs), and can be chosen for various switching frequencies

and input and output voltages.

NPN pass transistor or a single resistor. The voltage of the

power input can be as low as 1 V for fuel cell applications. The

switching frequency is set by an external resistor over a range of

100 kHz to 1.5 MHz and can be synchronized to an external

clock by using the SDSN pin. The shutdown quiescent current is

less than 10 μA. The ADP1621 has a thermal shutdown feature

that shuts down the gate driver when the junction temperature

reaches approximately 150°C. The internal soft start circuit limits

inrush current at startup. The ADP1621 is available in the 10-lead

MSOP lead-free package and is specified over the −40°C to +125°C

junction temperature range.

The ADP1621 supply input voltage range is 2.9 V to 5.5 V, although

higher input voltages are possible with the use of a small-signal

Rev. A

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registeredtrademarks arethe property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

Fax: 781.461.3113

www.analog.com

12 3 4 5 6 7...32

下载PDF

与ADP1621相关器件

型号	品牌	描述	获取价格	数据表
ADP1621_15	ADI	Constant-Frequency, Current-Mode Step-Up DC/DC Controller	获取价格
ADP1621ARMZ	ADI	Constant-Frequency, Current-Mode Step-Up DC/DC Controller	获取价格
ADP1621ARMZ-R7	ADI	Constant-Frequency, Current-Mode Step-Up DC/DC Controller	获取价格
ADP1621-EVAL	ADI	Constant-Frequency, Current-Mode Step-Up DC/DC Controller	获取价格
ADP162ACBZ-1.2-R7	ADI	Ultralow Quiescent Current, 150 mA, CMOS Linear Regulators	获取价格
ADP162ACBZ-1.8-R7	ADI	Ultralow Quiescent Current, 150 mA, CMOS Linear Regulators	获取价格

与ADP1621相关文章

MAX487芯片引脚图及功能、应用领域详解
2024-04-17

14
IR2110驱动芯片引脚图及功能、电路图详解
2024-04-17

10
74LS74是什么芯片 74LS74引脚图及功能表
2024-04-16

14
CD4511芯片引脚图及功能、电路图解析
2024-04-15

22

产品中心

服务支持

精选活动

关于我们

帮助中心

ADP1621

ADP1621 技术参数

ADP1621 数据手册

与ADP1621相关器件

与ADP1621相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ADP1621

ADP1621 技术参数

ADP1621 数据手册

与ADP1621相关器件

与ADP1621相关文章

您还可以找

您在本页遇到什么问题？