Super Sequencer with Margining Control
and Auxiliary ADC Inputs
ADM1066
FUNCTIONAL BLOCK DIAGRAM
FEATURES
AUX1 AUX2
REFIN
REFOUT REFGND SDA SCL A1
A0
Complete supervisory and sequencing solution for up to
10 supplies
ADM1066
SMBus
INTERFACE
VREF
10 supply fault detectors enable supervision of supplies to
<0.5% accuracy at all voltages at 25°C
<1.0% accuracy across all voltages and temperatures
5 selectable input attenuators allow supervision of supplies to
14.4 V on VH
12-BIT
SAR ADC
EEPROM
CLOSED-LOOP
MARGINING SYSTEM
VX1
VX2
VX3
VX4
VX5
PDO1
PDO2
PDO3
PDO4
PDO5
PDO6
CONFIGURABLE
OUTPUT
DRIVERS
DUAL-
FUNCTION
INPUTS
6 V on VP1 to VP4 (VPx)
5 dual-function inputs, VX1 to VX5 (VXx)
High impedance input to supply fault detector with
thresholds between 0.573 V and 1.375 V
General-purpose logic input
10 programmable driver outputs, PDO1 to PDO10 (PDOx)
Open-collector with external pull-up
Push/pull output, driven to VDDCAP or VPx
Open collector with weak pull-up to VDDCAP or VPx
Internally charge-pumped high drive for use with external
N-FET (PDO1 to PDO6 only)
(LOGIC INPUTS
OR
(HV CAPABLE OF
DRIVING GATES
OF N-FET)
SFDs)
SEQUENCING
ENGINE
VP1
VP2
VP3
VP4
VH
PDO7
PDO8
PDO9
CONFIGURABLE
OUTPUT
DRIVERS
PROGRAMMABLE
RESET
GENERATORS
(LV CAPABLE
OF DRIVING
LOGIC SIGNALS)
(SFDs)
PDO10
AGND
PDOGND
VDDCAP
VDD
ARBITRATOR
V
V
V
V
V
V
OUT
OUT
OUT
OUT
OUT
OUT
DAC DAC DAC DAC DAC DAC
Sequencing engine (SE) implements state machine control of
PDO outputs
State changes conditional on input events
Enables complex control of boards
DAC1 DAC2 DAC3 DAC4 DAC5 DAC6
VCCP GND
Figure 1.
Power-up and power-down sequence control
Fault event handling
Interrupt generation on warnings
APPLICATIONS
Watchdog function can be integrated in SE
Program software control of sequencing through SMBus
Complete voltage-margining solution for 6 voltage rails
6 voltage output 8-bit DACs (0.300 V to 1.551 V) allow voltage
adjustment via dc-to-dc converter trim/feedback node
12-bit ADC for readback of all supervised voltages
2 auxiliary (single-ended) ADC inputs
Central office systems
Servers/routers
Multivoltage system line cards
DSP/FPGA supply sequencing
In-circuit testing of margined supplies
GENERAL DESCRIPTION
The ADM1066 Super Sequencer® is a configurable supervisory/
sequencing device that offers a single-chip solution for supply
monitoring and sequencing in multiple-supply systems. In addition
to these functions, the ADM1066 integrates a 12-bit ADC and
six 8-bit voltage output DACs. These circuits can be used to
implement a closed-loop margining system that enables supply
adjustment by altering either the feedback node or reference of
a dc-to-dc converter using the DAC outputs.
Reference input (REFIN) has 2 input options
Driven directly from 2.048 V ( 0.25%) REFOUT pin
More accurate external reference for improved ADC
performance
Device powered by the highest of VPx, VH for improved
redundancy
User EEPROM: 256 bytes
Industry-standard 2-wire bus interface (SMBus)
Guaranteed PDO low with VH, VPx = 1.2 V
Available in 40-lead, 6 mm × 6 mm LFCSP and
48-lead, 7 mm × 7 mm TQFP packages
Supply margining can be performed with a minimum of external
components. The margining loop can be used for in-circuit testing
of a board during production (for example, to verify board func-
tionality at −5% of nominal supplies), or it can be used dynamically
to accurately control the output voltage of a dc-to-dc converter.
For more information about the ADM1066 register map,
refer to the AN-698 Application Note at www.analog.com.
Rev. E
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2004–2011 Analog Devices, Inc. All rights reserved.
5秒后页面跳转
MAX487芯片引脚图及功能、应用领域详解
IR2110驱动芯片引脚图及功能、电路图详解
74LS74是什么芯片 74LS74引脚图及功能表
CD4511芯片引脚图及功能、电路图解析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
