5秒后页面跳转
AD9513/PCB PDF预览

AD9513/PCB

更新时间: 2024-02-25 09:24:07
品牌 Logo 应用领域
亚德诺 - ADI 时钟
页数 文件大小 规格书
28页 608K
描述
800 MHz Clock Distribution IC, Dividers, Delay Adjust, Three Outputs

AD9513/PCB 技术参数

是否无铅:不含铅是否Rohs认证:符合
生命周期:Active零件包装代码:QFN
包装说明:HVQCCN,针数:32
Reach Compliance Code:unknown风险等级:5.75
Is Samacsys:N系列:9513
输入调节:DIFFERENTIALJESD-30 代码:S-XQCC-N32
JESD-609代码:e3长度:5 mm
逻辑集成电路类型:LOW SKEW CLOCK DRIVER湿度敏感等级:3
功能数量:1反相输出次数:
端子数量:32实输出次数:3
最高工作温度:85 °C最低工作温度:-40 °C
封装主体材料:UNSPECIFIED封装代码:HVQCCN
封装形状:SQUARE封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
峰值回流温度(摄氏度):260传播延迟(tpd):2.01 ns
认证状态:COMMERCIALSame Edge Skew-Max(tskwd):0.51 ns
座面最大高度:1 mm最大供电电压 (Vsup):3.465 V
最小供电电压 (Vsup):3.135 V标称供电电压 (Vsup):3.3 V
表面贴装:YES温度等级:INDUSTRIAL
端子面层:MATTE TIN端子形式:NO LEAD
端子节距:0.5 mm端子位置:QUAD
处于峰值回流温度下的最长时间:40宽度:5 mm
最小 fmax:800 MHzBase Number Matches:1

AD9513/PCB 数据手册

 浏览型号AD9513/PCB的Datasheet PDF文件第2页浏览型号AD9513/PCB的Datasheet PDF文件第3页浏览型号AD9513/PCB的Datasheet PDF文件第4页浏览型号AD9513/PCB的Datasheet PDF文件第5页浏览型号AD9513/PCB的Datasheet PDF文件第6页浏览型号AD9513/PCB的Datasheet PDF文件第7页 
800 MHz Clock Distribution IC, Dividers,  
Delay Adjust, Three Outputs  
AD9513  
FUNCTIONAL BLOCK DIAGRAM  
FEATURES  
RSET  
VS  
GND  
1.6 GHz differential clock input  
3 programmable dividers  
LVDS/CMOS  
LVDS/CMOS  
LVDS/CMOS  
AD9513  
Divide-by in range from1 to 32  
Phase select for coarse delay adjust  
Three 800 MHz/250 MHz LVDS/CMOS clock outputs  
Additive output jitter 300 fs rms  
Time delays up to 11.6 ns  
OUT0  
/1. . . /32  
OUT0B  
CLK  
OUT1  
/1. . . /32  
Device configured with 4-level logic pins  
Space-saving, 32-lead LFCSP  
CLKB  
OUT1B  
SYNCB  
OUT2  
APPLICATIONS  
/1. . . /32  
t  
OUT2B  
Low jitter, low phase noise clock distribution  
Clocking high speed ADCs, DACs, DDSs, DDCs, DUCs, MxFEs  
High performance wireless transceivers  
High performance instrumentation  
Broadband infrastructure  
SETUP LOGIC  
VREF  
S10 S9 S8 S7 S6 S5 S4 S3 S2 S1 S0  
Figure 1.  
ATE  
GENERAL DESCRIPTION  
The AD9513 features a three-output clock distribution IC in a  
design that emphasizes low jitter and phase noise to maximize  
data converter performance. Other applications with  
demanding phase noise and jitter requirements also benefit  
from this part.  
One of the outputs features a delay element with three selectable  
full-scale delay values (1.8 ns, 6.0 ns, and 11.6 ns), each with  
16 steps of fine adjustment.  
The AD9513 does not require an external controller for  
operation or setup. The device is programmed by means of  
11 pins (S0 to S10) using 4-level logic. The programming pins  
are internally biased to ⅓ VS. The VREF pin provides a level of  
⅔ VS. VS (3.3 V) and GND (0 V) provide the other two logic levels.  
There are three independent clock outputs that can be set to  
either LVDS or CMOS levels. These outputs operate to  
800 MHz in LVDS mode and to 250 MHz in CMOS mode.  
Each output has a programmable divider that can be set to  
divide by a selected set of integers ranging from 1 to 32. The  
phase of one clock output relative to the other clock output can  
be set by means of a divider phase select function that serves as  
a coarse timing adjustment.  
The AD9513 is ideally suited for data converter clocking  
applications where maximum converter performance is  
achieved by encode signals with subpicosecond jitter.  
The AD9513 is available in a 32-lead LFCSP and operates from  
a single 3.3 V supply. The temperature range is −40°C to +85°C.  
Rev. 0  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
© 2005 Analog Devices, Inc. All rights reserved.  
 

与AD9513/PCB相关器件

型号 品牌 描述 获取价格 数据表
AD9513BCPZ ADI 800 MHz Clock Distribution IC, Dividers, Delay Adjust, Three Outputs

获取价格

AD9513BCPZ-REEL7 ADI 800 MHz Clock Distribution IC, Dividers, Delay Adjust, Three Outputs

获取价格

AD9514 ADI 1.6 GHz Clock Distribution IC, Dividers, Delay Adjust, Three Outputs

获取价格

AD9514/PCB ADI 1.6 GHz Clock Distribution IC, Dividers, Delay Adjust, Three Outputs

获取价格

AD9514BCPZ ADI 1.6 GHz Clock Distribution IC, Dividers, Delay Adjust, Three Outputs

获取价格

AD9514BCPZ-REEL7 ADI 1.6 GHz Clock Distribution IC, Dividers, Delay Adjust, Three Outputs

获取价格