5秒后页面跳转
AD8224ACPZ-WP PDF预览

AD8224ACPZ-WP

更新时间: 2024-02-26 14:39:05
品牌 Logo 应用领域
亚德诺 - ADI 仪表放大器
页数 文件大小 规格书
27页 1382K
描述
Precision, Dual-Channel, JFET Input Rail-to-Rail Instrumentation Amplifier

AD8224ACPZ-WP 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:CSP
包装说明:VQCCN,针数:16
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.31.00.01风险等级:2.24
放大器类型:INSTRUMENTATION AMPLIFIER最大平均偏置电流 (IIB):0.00001 µA
标称带宽 (3dB):1.5 MHz最小共模抑制比:56 dB
最大输入失调电流 (IIO):6e-7 µA最大输入失调电压:175 µV
JESD-30 代码:S-XQCC-N16JESD-609代码:e3
长度:4 mm湿度敏感等级:3
负供电电压上限:-18 V标称负供电电压 (Vsup):-15 V
最大非线性:0.025%功能数量:2
端子数量:16最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:UNSPECIFIED
封装代码:VQCCN封装形状:SQUARE
封装形式:CHIP CARRIER, VERY THIN PROFILE峰值回流温度(摄氏度):260
座面最大高度:1 mm子类别:Instrumentation Amplifier
供电电压上限:18 V标称供电电压 (Vsup):15 V
表面贴装:YES温度等级:INDUSTRIAL
端子面层:Matte Tin (Sn)端子形式:NO LEAD
端子节距:0.65 mm端子位置:QUAD
处于峰值回流温度下的最长时间:30最大电压增益:1000
最小电压增益:2标称电压增益:10
宽度:4 mmBase Number Matches:1

AD8224ACPZ-WP 数据手册

 浏览型号AD8224ACPZ-WP的Datasheet PDF文件第2页浏览型号AD8224ACPZ-WP的Datasheet PDF文件第3页浏览型号AD8224ACPZ-WP的Datasheet PDF文件第4页浏览型号AD8224ACPZ-WP的Datasheet PDF文件第5页浏览型号AD8224ACPZ-WP的Datasheet PDF文件第6页浏览型号AD8224ACPZ-WP的Datasheet PDF文件第7页 
Precision, Dual-Channel, JFET Input  
Rail-to-Rail Instrumentation Amplifier  
Preliminary Technical Data  
AD8224  
FEATURES  
FUNCTIONAL BLOCK DIAGRAM  
Two channels in a small 4 mm × 4 mm LFCSP  
Low input currents  
16 15 14 13  
10 pA maximum input bias current (B grade)  
0.6 pA maximum input offset current (B grade)  
High CMRR  
100 dB CMRR (minimum), G = 10 (B grade)  
80 dB CMRR (minimum) to 5 kHz, G = 1 (B grade)  
Excellent ac specifications and low power  
1.5 MHz bandwidth (G = 1)  
AD8224  
1
2
3
4
12  
11  
10  
9
–IN1  
RG1  
RG1  
+IN1  
–IN2  
RG2  
RG2  
+IN2  
5
6
7
8
14 nV/√Hz input noise (1 kHz)  
Slew rate 2 V/μs  
750 μA quiescent supply current per amplifier (maximum)  
Versatility  
Figure 1. 4mm × 4 mm LFCSP  
Rail-to-rail output  
Table 1. In Amps and Difference Amplifiers by Category  
Input voltage range to below negative supply rail  
4 kV ESD protection  
4.5 V to 36 V single supply  
2.25 V to 18 V dual supply  
Gain set with single resistor (G = 1 to 1000)  
High  
Perform. Cost  
Low  
High  
Volt.  
Mil  
Low  
Digital  
Gain  
Grade Power  
AD82201  
AD8221  
AD8222  
AD82241  
AD85531 AD628 AD620 AD6271 AD85551  
AD6231  
AD629 AD621  
AD524  
AD85561  
AD85571  
AD526  
APPLICATIONS  
AD624  
Medical instrumentation  
Precision data acquisition  
Transducer interface  
Differential drive for  
High resolution input ADCs  
Remote sensors  
1 Rail-to-rail output.  
GENERAL DESCRIPTION  
The AD8224 is the first single-supply junction field effect  
transistor (JFET) input instrumentation amplifier available in  
the space-saving 16-lead, 4 mm×4 mm LFCSP. It requires the  
same board area as a typical single instrumentation amplifier,  
yet doubles the channel density and offers a lower cost per  
channel without compromising performance.  
Designed to alleviate this problem, the AD8224 can operate on a  
18 V dual supply, as well as on a single +5 V supply. The device’s  
rail-to-rail output stage maximizes dynamic range on the low  
voltage supplies common in portable applications. Its ability to run  
on a single 5 V supply eliminates the need for higher voltage, dual  
supplies. The AD8224 draws a maximum of 750 μA of quiescent  
current per amplifier, making it ideal for battery-powered devices.  
Designed to meet the needs of high performance, portable  
instrumentation, the AD8224 has a minimum common-mode  
rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR  
of 80 dB at 5 kHz for G = 1. Maximum input bias current is  
10 pA and typically remains below 300 pA over the entire  
industrial temperature range. Despite the JFET inputs, the  
AD8224 typically has a noise corner of only 10 Hz.  
In addition, the AD8224 can be configured as a single-channel,  
differential output instrumentation amplifier. Differential  
outputs provide high noise immunity, which can be useful when  
the output signal must travel through a noisy environment, such  
as with remote sensors. The configuration can also be used to  
drive differential input ADCs.  
With the proliferation of mixed-signal processing, the number of  
power supplies required in each system has grown.  
For a single-channel version, use the AD8220 device.  
Rev. PrB  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2006 Analog Devices, Inc. All rights reserved.  

与AD8224ACPZ-WP相关器件

型号 品牌 描述 获取价格 数据表
AD8224BCPZ-R7 ADI Precision, Dual-Channel, JFET Input Rail-to-Rail Instrumentation Amplifier

获取价格

AD8224BCPZ-RL ADI Precision, Dual-Channel, JFET Input Rail-to-Rail Instrumentation Amplifier

获取价格

AD8224BCPZ-WP ADI Precision, Dual-Channel, JFET Input Rail-to-Rail Instrumentation Amplifier

获取价格

AD8224-EVALZ ADI Precision, Dual-Channel, JFET Input Rail-to-Rail Instrumentation Amplifier

获取价格

AD8224HACPZ-R7 ADI Precision, Dual-Channel, JFET Input, Rail-to-Rail Instrumentation Amplifier

获取价格

AD8224HACPZ-RL ADI Precision, Dual-Channel, JFET Input, Rail-to-Rail Instrumentation Amplifier

获取价格