5秒后页面跳转
AD652JP PDF预览

AD652JP

更新时间: 2024-02-25 14:09:11
品牌 Logo 应用领域
亚德诺 - ADI 转换器
页数 文件大小 规格书
16页 951K
描述
Monolithic Synchronous Voltage-to-Frequency Converter

AD652JP 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:Active零件包装代码:DIP
包装说明:CERDIP-16针数:16
Reach Compliance Code:unknown风险等级:5.65
Is Samacsys:N转换器类型:VOLTAGE TO FREQUENCY CONVERTER
JESD-30 代码:R-GDIP-T16JESD-609代码:e0
长度:19.05 mm最大线性误差 (EL):0.05%
湿度敏感等级:NOT APPLICABLE最大负输入电压:-5 V
最大负电源电压:-18 V最小负电源电压:-6 V
标称负供电电压:-15 V功能数量:1
端子数量:16最大工作频率:4 MHz
最高工作温度:125 °C最低工作温度:-55 °C
封装主体材料:CERAMIC, GLASS-SEALED封装代码:DIP
封装形状:RECTANGULAR封装形式:IN-LINE
峰值回流温度(摄氏度):NOT APPLICABLE最大正输入电压:5 V
认证状态:COMMERCIAL座面最大高度:5.08 mm
最大供电电压:18 V最小供电电压:6 V
标称供电电压:15 V表面贴装:NO
温度等级:MILITARY端子面层:TIN LEAD
端子形式:THROUGH-HOLE端子节距:2.54 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT APPLICABLE
最大总误差:0.5%宽度:7.62 mm
Base Number Matches:1

AD652JP 数据手册

 浏览型号AD652JP的Datasheet PDF文件第2页浏览型号AD652JP的Datasheet PDF文件第3页浏览型号AD652JP的Datasheet PDF文件第4页浏览型号AD652JP的Datasheet PDF文件第5页浏览型号AD652JP的Datasheet PDF文件第6页浏览型号AD652JP的Datasheet PDF文件第7页 
Monolithic Synchronous  
Voltage-to-Frequency Converter  
a
AD652  
FUNCTIONAL BLOCK DIAGRAM  
FEATURES  
Full-Scale Frequency (Up to 2 MHz) Set by External  
System Clock  
Extremely Low Linearity Error (0.005% max at 1 MHz  
FS, 0.02% max at 2 MHz FS)  
No Critical External Components Required  
Accurate 5 V Reference Voltage  
Low Drift (25 ppm/؇C max)  
Dual or Single Supply Operation  
Voltage or Current Input  
MIL-STD-883 Compliant Versions Available  
PRODUCT DESCRIPTION  
PRODUCT HIGHLIGHTS  
The AD652 Synchronous Voltage-to-Frequency Converter  
(SVFC) is a powerful building block for precision analog-to-  
digital conversion, offering typical nonlinearity of 0.002%  
(0.005% maximum) at a 100 kHz output frequency. The inher-  
ent monotonicity of the transfer function and wide range of  
clock frequencies allows the conversion time and resolution to  
be optimized for specific applications.  
1. The use of an external clock to set the full-scale frequency  
allows the AD652 to achieve linearity and stability far supe-  
rior to other monolithic VFCs. By using the same clock to  
drive the AD652 and (through a suitable divider) also set the  
counting period, conversion accuracy is maintained indepen-  
dent of variations in clock frequency.  
2. The AD652 Synchronous VFC requires only a single external  
component (a noncritical integrator capacitor) for operation.  
The AD652 uses a variation of the popular charge-balancing  
technique to perform the conversion function. The AD652 uses  
an external clock to define the full-scale output frequency,  
rather than relying on the stability of an external capacitor. The  
result is a more stable, more linear transfer function, with sig-  
nificant application benefits in both single- and multichannel  
systems.  
3. The AD652 includes a buffered, accurate 5 V reference  
which is available to the user.  
4. The clock input of the AD652 is TTL and CMOS compat-  
ible and can also be driven by sources referred to the negative  
power supply. The flexible open-collector output stage pro-  
vides sufficient current sinking capability for TTL and CMOS  
logic, as well as for optical couplers and pulse transformers.  
A capacitor-programmable one-shot is provided for selection  
of optimum output pulse width for power reduction.  
Gain drift is minimized using a precision low drift reference and  
low TC on-chip thin-film scaling resistors. Furthermore, the ini-  
tial gain error is reduced to less than 0.5% by the use of  
laser-wafer-trimming.  
5. The AD652 can also be configured for use as a synchronous  
F/V converter for isolated analog signal transmission.  
The analog and digital sections of the AD652 have been de-  
signed to allow operation from a single-ended power source,  
simplifying its use with isolated power supplies.  
6. The AD652 is available in versions compliant with MIL-  
STD-883. Refer to the Analog Devices Military Products  
Databook or current AD652/883B data sheet for detailed  
specifications.  
The AD652 is available in five performance grades. The 20-lead  
PLCC packaged JP and KP grades are specified for operation  
over the 0°C to +70°C commercial temperature range. The  
16-lead cerdip-packaged AQ and BQ grades are specified for  
operation over the –40°C to +85°C industrial temperature  
range, and the AD652SQ is available for operation over the full  
–55°C to +125°C extended temperature range.  
REV. B  
Information furnished by Analog Devices is believed to be accurate and  
reliable. However, no responsibility is assumed by Analog Devices for its  
use, nor for any infringements of patents or other rights of third parties  
which may result from its use. No license is granted by implication or  
otherwise under any patent or patent rights of Analog Devices.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781/329-4700  
Fax: 781/326-8703  
World Wide Web Site: http://www.analog.com  
© Analog Devices, Inc., 2000  

与AD652JP相关器件

型号 品牌 描述 获取价格 数据表
AD652JP-REEL ADI Monolithic Synchronous Voltage-to-Frequency Converter

获取价格

AD652JP-REEL ROCHESTER VOLTAGE-FREQUENCY CONVERTER, 4 MHz, PQCC20, PLASTIC, LCC-20

获取价格

AD652JP-REEL7 ADI Monolithic Synchronous Voltage-to-Frequency Converter

获取价格

AD652JP-REEL7 ROCHESTER VOLTAGE-FREQUENCY CONVERTER, 4 MHz, PQCC20, PLASTIC, LCC-20

获取价格

AD652JPZ ROCHESTER VOLTAGE-FREQUENCY CONVERTER, 4 MHz, PQCC20, PLASTIC, LCC-20

获取价格

AD652JPZ ADI Monolithic Synchronous Voltage-to-Frequency Converter

获取价格