5秒后页面跳转
AD594AQ PDF预览

AD594AQ

更新时间: 2024-01-16 00:40:19
品牌 Logo 应用领域
亚德诺 - ADI 仪表放大器放大器电路PC
页数 文件大小 规格书
8页 140K
描述
Monolithic Thermocouple Amplifiers with Cold Junction Compensation

AD594AQ 技术参数

Source Url Status Check Date:2013-05-01 14:56:15.076是否无铅: 含铅
是否Rohs认证: 不符合生命周期:Active
零件包装代码:DIP包装说明:CERDIP-14
针数:14Reach Compliance Code:not_compliant
ECCN代码:EAR99HTS代码:8542.31.00.01
风险等级:7.24放大器类型:INSTRUMENTATION AMPLIFIER
最大平均偏置电流 (IIB):0.1 µA标称带宽 (3dB):0.015 MHz
JESD-30 代码:R-GDIP-T14JESD-609代码:e0
长度:19.55 mm功能数量:1
端子数量:14最高工作温度:125 °C
最低工作温度:-55 °C封装主体材料:CERAMIC, GLASS-SEALED
封装代码:DIP封装等效代码:DIP14,.3
封装形状:RECTANGULAR封装形式:IN-LINE
峰值回流温度(摄氏度):NOT APPLICABLE电源:5 V
认证状态:Not Qualified座面最大高度:5.283 mm
子类别:Instrumentation Amplifier最大压摆率:0.3 mA
供电电压上限:36 V标称供电电压 (Vsup):5 V
表面贴装:NO技术:BIPOLAR
温度等级:MILITARY端子面层:Tin/Lead (Sn63Pb37)
端子形式:THROUGH-HOLE端子节距:2.54 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT APPLICABLE
宽度:7.62 mmBase Number Matches:1

AD594AQ 数据手册

 浏览型号AD594AQ的Datasheet PDF文件第2页浏览型号AD594AQ的Datasheet PDF文件第3页浏览型号AD594AQ的Datasheet PDF文件第4页浏览型号AD594AQ的Datasheet PDF文件第5页浏览型号AD594AQ的Datasheet PDF文件第6页浏览型号AD594AQ的Datasheet PDF文件第7页 
Monolithic Thermocouple Amplifiers  
with Cold Junction Compensation  
a
AD594/AD595  
FUNCTIONAL BLOCK DIAGRAM  
FEATURES  
Pretrimmed for Type J (AD594) or  
Type K (AD595) Thermocouples  
–IN  
14  
–ALM +ALM  
13 12  
V+  
11  
COMP  
10  
VO  
9
FB  
8
Can Be Used with Type T Thermocouple Inputs  
Low Impedance Voltage Output: 10 mV/؇C  
Built-In Ice Point Compensation  
Wide Power Supply Range: +5 V to ؎15 V  
Low Power: <1 mW typical  
OVERLOAD  
DETECT  
AD594/AD595  
+A  
Thermocouple Failure Alarm  
Laser Wafer Trimmed to 1؇C Calibration Accuracy  
Setpoint Mode Operation  
Self-Contained Celsius Thermometer Operation  
High Impedance Differential Input  
Side-Brazed DIP or Low Cost Cerdip  
ICE  
POINT  
COMP.  
G
G
–TC  
+TC  
1
2
3
4
5
6
7
+IN  
+C  
+T  
COM  
–T  
–C  
V–  
PRODUCT DESCRIPTION  
are available at the package pins so that the circuit can be  
recalibrated for the thermocouple types by the addition of two  
or three resistors. These terminals also allow more precise cali-  
bration for both thermocouple and thermometer applications.  
The AD594/AD595 is a complete instrumentation amplifier and  
thermocouple cold junction compensator on a monolithic chip.  
It combines an ice point reference with a precalibrated amplifier  
to produce a high level (10 mV/°C) output directly from a ther-  
mocouple signal. Pin-strapping options allow it to be used as a  
linear amplifier-compensator or as a switched output setpoint  
controller using either fixed or remote setpoint control. It can  
be used to amplify its compensation voltage directly, thereby  
converting it to a stand-alone Celsius transducer with a low  
impedance voltage output.  
The AD594/AD595 is available in two performance grades. The  
C and the A versions have calibration accuracies of ±1°C and  
±3°C, respectively. Both are designed to be used from 0°C to  
+50°C, and are available in 14-pin, hermetically sealed, side-  
brazed ceramic DIPs as well as low cost cerdip packages.  
PRODUCT HIGHLIGHTS  
The AD594/AD595 includes a thermocouple failure alarm that  
indicates if one or both thermocouple leads become open. The  
alarm output has a flexible format which includes TTL drive  
capability.  
1. The AD594/AD595 provides cold junction compensation,  
amplification, and an output buffer in a single IC package.  
2. Compensation, zero, and scale factor are all precalibrated by  
laser wafer trimming (LWT) of each IC chip.  
The AD594/AD595 can be powered from a single ended supply  
(including +5 V) and by including a negative supply, tempera-  
tures below 0°C can be measured. To minimize self-heating, an  
unloaded AD594/AD595 will typically operate with a total sup-  
ply current 160 µA, but is also capable of delivering in excess of  
±5 mA to a load.  
3. Flexible pinout provides for operation as a setpoint control-  
ler or a stand-alone temperature transducer calibrated in  
degrees Celsius.  
4. Operation at remote application sites is facilitated by low  
quiescent current and a wide supply voltage range +5 V to  
dual supplies spanning 30 V.  
The AD594 is precalibrated by laser wafer trimming to match  
the characteristic of type J (iron-constantan) thermocouples and  
the AD595 is laser trimmed for type K (chromel-alumel) inputs.  
The temperature transducer voltages and gain control resistors  
5. Differential input rejects common-mode noise voltage on the  
thermocouple leads.  
REV. C  
Information furnished by Analog Devices is believed to be accurate and  
reliable. However, no responsibility is assumed by Analog Devices for its  
use, nor for any infringements of patents or other rights of third parties  
which may result from its use. No license is granted by implication or  
otherwise under any patent or patent rights of Analog Devices.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781/329-4700  
Fax: 781/326-8703  
World Wide Web Site: http://www.analog.com  
© Analog Devices, Inc., 1999  

与AD594AQ相关器件

型号 品牌 描述 获取价格 数据表
AD594C ADI Monolithic Thermocouple Amplifiers with Cold Junction Compensation

获取价格

AD594CD ADI Monolithic Thermocouple Amplifiers with Cold Junction Compensation

获取价格

AD594CD/+ ETC Thermocouple Amplifier

获取价格

AD594CDZ ADI Monolithic Thermocouple Amplifiers with Cold Junction Compensation

获取价格

AD594CQ ADI Monolithic Thermocouple Amplifiers with Cold Junction Compensation

获取价格

AD595 ADI Monolithic Thermocouple Amplifiers with Cold Junction Compensation

获取价格