155W Single Output with Battery Charger(UPS Function)
AD-155 series
Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Battery low and battery polarity protection
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at PFC 67KHz, PWM 134KHz
2 years warranty
SPECIFICATION
MODEL
AD-155A
AD-155B
AD-155C
OUTPUT NUMBER
CH1
CH2
CH1
CH2
CH1
CH2
DC VOLTAGE
13.8V
13.3V
0.5A
27.6V
27.1V
0.5A
54V
53.5V
0.2A
RATED CURRENT
CURRENT RANGE
RATED POWER
10.5A
5A
2.7A
0 ~ 11.5A
151.55W
0 ~ 0.5A
0 ~ 5.5A
151.55W
150mVp-p
CH1: 24 ~ 29V
1.0%
0 ~ 0.5A
0 ~ 2.7A
156.5W
240mVp-p
CH1: 48 ~ 58V
1.0%
0 ~ 0.5A
RIPPLE & NOISE (max.) Note.2 150mVp-p
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3 2.0%
--------
--------
--------
OUTPUT
CH1: 12 ~ 14.5V
--------
--------
--------
--------
--------
--------
--------
--------
--------
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
1000ms, 90ms/230VAC
2000ms, 90ms/115VAC at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
24ms/230VAC
88 ~ 264VAC
47 ~ 63Hz
20ms/115VAC at full load
124 ~ 370VDC
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
PF>0.92 at full load
80%
84%
84%
INPUT
2.5A/115VAC
1.5A/230VAC
COLD START 20A/115VAC
<1mA / 240VAC
40A/230VAC
LEAKAGE CURRENT
OVERLOAD
CH1:105 ~ 135%
CH2:0.51 ~ 0.9A rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is reoved
CH1:15.87 ~ 18.63V
Protection type : Shut down o/p voltage, re-power on to recover
10V 0.8V 19.5V(+1.5V,-1V )
CH1:31.74 ~ 37.26V
CH1:62.1 ~ 72.9V
39V 2V
PROTECTION
OVER VOLTAGE
BATTERY LOW
-10 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
ENVIRONMENT
TEMP. COEFFICIENT
VIBRATION
0.03%/ (0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
SAFETY &
EMC
(Note 4)
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
EMS IMMUNITY
MTBF
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
183.3K hrs min. MIL-HDBK-217F (25
199*110*50mm (L*W*H)
)
OTHERS
NOTE
DIMENSION
PACKING
0.88Kg; 16pcs/15Kg/0.95CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:AD-155-SPEC 2008-10-08