Tel :
Fax :
0044 (0)118 979 1238
0044 (0)118 979 1283
email :
info@actcrystals.com
ACTMPX11-6 LVPECL Saw Oscillator
The ACT MPX11-6 is a PCB Based, SMD, LVPECL Saw oscillator. This 14 x10.3mm device can be
used in a wide range of applications, especially where a high fundamental frequency with low phase
noise and jitter are required. This device is offered in a range of standard, frequencies from
311.04~625.0 MHz, common to communications applications.( SONET / SDH etc.. ) The devices ar
available reeled ( 500 pcs ) or loose to suit high/low volume requirements.
Specification
Parameter
Symbol
VDD
fo
Specification
3.3VDC ± 10%
311.040 MHz, 312.500 MHz,400.00MHz, 622.080MHz, 625.00MHz
±25ppm ~ ±50ppm
Condition
Supply Voltage
Frequency Range
Frequency Stability
Please specify
Please specify
Please specify
Δf/fo
Temp Operating Range Topr
0 ~ +70°C Std
( -40 ~ +85°C available)
Temp Storage Range
Supply Current (max)
Duty Cycle
Output Level ‘0’
Output Level ‘1’
Tstg
Iop
Tw/t
VOL
VOH
-55 to +125°C
130mA max
45/55%
VDD-1.620Vdcmax
VDD -1.025Vdc min
800pS max
Rise & Fall Time (max) TrTf
Output Load
Jitter
Aging
N/CL
VDD-2.0Vdc to 50 ohm
1.0pS max
12kHz to 20MHz
@25°C
@10Hz
Fa
±3ppm / year
-65dBc/Hz
-98dBc/Hz
-125dBc/Hz
@100Hz
@1kHz
Phase Noise
-130dBc/Hz
-135dBc/Hz
@10kHz
@100kHz
Dimensions (mm)
Pin Connection
#1
#2
#3
#4
#5
#6
Tri-state
N/C
Ground
Output
Complementary Output
Vdd
Pad surface material Au
Please note that all parameters can not necessarily be specified in the same device
Customer to specify : Frequency, Frequency Stability, Operating Temperature Range,
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
1 of 3