ACT8945A
Rev 6, 01-Feb-16
Advanced PMU for Atmel SAMA5Dx Series & SAM9 Series Processors
human-machine interfaces, control panels, smart grid
infrastructures, network gateways, M2M systems, 2D
FEATURES
barcode scanners, barcode printers, machine vision
Three Step-Down DC/DC Converters
equipment, as well as home and commercial building
Four Low-Dropout Linear Regulators
automations, POS terminals, medical devices and white
Integrated ActivePathTM Charger
goods. This device integrates the ActivePathTM
complete battery charging and management system
with seven power supply channels.
I2CTM Serial Interface
Advanced Enable/Disable Sequencing Controller
Minimal External Components
Tiny 5×5mm TQFN55-40 Package
0.75mm Package Height
This device features three step-down DC/DC
converters and four low-noise, low-dropout linear
regulators, along with a complete battery charging
solution featuring the advanced ActivePathTM
system-power selection function.
Pb-Free and RoHS Compliant
The three DC/DC converters utilize
a high-
efficiency, fixed-frequency (2MHz), current-mode
PWM control architecture that requires a minimum
number of external components. Two DC/DCs are
capable of supplying up to 1100mA of output
current, while the third supports up to 1200mA. All
four low-dropout linear regulators are high-
performance, low-noise regulators that supply up to
320mA of output current.
GENERAL DESCRIPTION
The ACT8945A is a complete, cost effective, highly-
efficient ActivePMUTM power management solution,
optimized for the unique power, voltage-
sequencing, and control requirements of the Atmel
SAMA5D2 ,SAMA5D3 series: SAMA5D[31/33/34/35/36],
and Atmel SAM9 series: SAM9G[15/25/35/45/46],
SAM9X[25/35], SAM9M[10/11], SAM9N[11/12]
processors. It is ideal for a wide range of high
performance portable handheld applications such as
The ACT8945A is available in a compact, Pb-Free
and RoHS-compliant TQFN55-40 package.
TYPICAL APPLICATION DIAGRAM
Atmel
SAMA5Dx
ACT8945A
Li+ Battery
+
CHGIN
TH
ActivePathTM Charger
Control
REG1
REG2
1150mA
1150mA
1300mA
VDDIODDR etc.
1.8V
1.2V
3.3V
ISET
VDDCORE_GBIT ENET etc.
VDDIOP etc.
REG3
REG4
REG5
REG6
REG7
320mA
VDDFUSE
320mA
320mA
320mA
VDDANA
nSTAT
nPBIN
CHARGE
STATUS
Auxiliary 1
Auxiliary 1
TWD
SDA
SCL
TWCK
PUSH BUTTON
NRST
FIQ/IRQ
GPIO
nRSTO
nIRQ
nPBSTAT
www.active-semi.com
Copyright © 2016 Active-Semi, Inc.
- 1 -
ActivePMUTM and ActivePathTM are trademarks of Active-Semi.
I2CTM is a trademark of NXP.