ACT2802
Rev 0, 21-Jan-14
5V/2.5A Backup Battery Pack Manager
FEATURES
Dedicated Single Chip Solution for Mobile
APPLICATIONS
Backup Battery Pack
Power Bank
Power With Minimal Component Count
5V/2.5A Constant Output Current Limit in
Boost Mode
2.5A Switching Charger Current Limit
Programmable 4.1V to 4.35V Battery Voltage
95% Boost Efficiency (Vbat=4.1V)
Adaptive to 10mA-2400mA Input Sources
Battery Disconnection at Output Short
Mobile Power
Standalone Battery Charger with USB Output
GENERAL DESCRIPTION
ACT2802 is a space-saving and high-performance
low-profile single-chip solution for backup battery
pack and standalone battery charger. ACT2802
integrates all the functions that a backup battery
pack needs, including switching charger, boost
converter and LED indication.
<10µA Low Battery Leakage Current at HZ
Mode During Storage
Boost Auto Turn-off at No Load and Push
Button Turn-on
Battery Over Current, Over Voltage, Over
ACT2802 operates at 1.1MHz for switching charger
and 0.55MHz for boost converter allowing tiny
external inductor and capacitors. ACT2802 provides
a direct power path from input to output with
programmable current limit while providing power
to switching charger. Output has higher priority than
battery charger if the programmed input current limit
is reached.
Temperature and Short Circuit Protections
Boost Auto Startup with Load Detection
Up to 3.0A Input Current Limit with Prioritized
Power Path to Output
5V+/-100mV Output Voltage in Boost Mode
1.1MHz/0.55MHz Switching Frequencies
2.2uH Inductor and Low Profile Ceramic
ACT2802 charges battery with full cycle of
preconditioning, fast charge with constant current
and constant voltage until end of charge. The
battery charger is thermally regulated at 110°C with
charge current foldback.
Capacitors
4 LEDs Battery Level and Status Indication
Battery Impedance Compensation
Full Cycle of Battery Charge Management
Preconditioning, Fast Charge, Top off and End
of Charge
ACT2802 boost converter steps battery voltage up
to 5V. Boost converter features high efficiency,
constant current regulation, short circuit protection
and over voltage protection.
Charge Current Foldback at 110°C Die
Temperature
IC Over Temperature Protection at 160°C
QFN4x4-24 Package
ACT2802 provides 3.5mA constant currents to drive
4 LEDs to indicate battery level and charge status.
Boost CC/CV Profile
5.5
VBAT =3.2V
5.0
VBAT =3.7V
4.5
4.0
VBAT =4.1V
3.5
3.0
0
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
Output Current (A)
Innovative PowerTM
- 1 -
www.active-semi.com
Copyright © 2014 Active-Semi, Inc.
ActiveSwitcherTM is a trademark of Active-Semi.