ACT2801/ACT2801C
Rev 2, 15-Apr-14
5V/1.5A Backup Battery Pack Manager
FEATURES
APPLICATIONS
• Backup Battery Pack
• Power Bank
• Mobile Power
• Standalone Battery Charger with USB Output
• Dedicated Single Chip Solution for Mobile Power
With Minimal Component Count
• 5V/1.5A Constant Output Current Limit in Boost
Mode
• 1.5A Switching Charger Limit
• Programmable 4.1V to 4.35V Battery Voltage
• 95% Boost Efficiency (Vbat=4.1V)
• Adaptive to 10mA-2400mA Input Sources
• Battery Disconnection at Output Short
GENERAL DESCRIPTION
ACT2801/ACT2801C is a space-saving and high-
performance low-profile single-chip solution for
backup battery pack and standalone battery
charger. ACT2801/ACT2801C integrates all the
functions that a backup battery pack needs,
including switching charger, boost converter and
LED indication.
• <10µA Low Battery Leakage Current at HZ
Mode During Storage
• Boost Auto Turn-off at No Load and Push
Button Turn-on
ACT2801/ACT2801C operates at 1.1MHz for
switching charger and 0.55MHz for boost converter
allowing tiny external inductor and capacitors.
ACT2801/ACT2801C provides a direct power path
from input to output with programmable current limit
while providing power to switching charger. Output
has higher priority than battery charger if the
programmed input current limit is reached.
• Battery Over Current, Over Voltage, Over
Temperature and Short Circuit Protections
• Boost Auto Startup with Load Detection
• Up to 2.0A Input Current Limit with Prioritized
Power Path to Output
• 5V+/-100mV Output Voltage in Boost Mode
• 1.1MHz/0.55MHz Switching Frequencies
ACT2801/ACT2801C charges battery with full cycle
of preconditioning, fast charge with constant current
and constant voltage until end of charge. The
battery charger is thermally regulated at 110°C with
charge current foldback.
• 2.2uH SMD Inductor and Low Profile Ceramic
Capacitor
• 4 LEDs Battery Level and Status Indication
• Battery Impedance Compensation
• Full Cycle of Battery Charge Management
Preconditioning, Fast Charge, Top off and End
of Charge
ACT2801/ACT2801C boost converter steps battery
voltage up to 5V. Boost converter features high
efficiency, constant current regulation, short circuit
protection and over voltage protection.
• Charge Current Foldback at 110°C Die
Temperature
ACT2801/ACT2801C provides 3.5mA constant
currents to drive 4 LEDs to indicate battery level
and charge status. Battery impedance is
compensated for battery level indication.
• IC Over Temperature Protection at 160°C
• QFN4x4-24 Package
Boost CC/CV Curve
5.5
VBAT =3.7V
5.0
VBAT =3.2V
4.5
4.0
VBAT =4.1V
3.5
3.0
0
200
400
600
800
1000
1200
1400
Output Current (mA)
Innovative PowerTM
- 1 -
www.active-semi.com
Copyright © 2014 Active-Semi, Inc.