ACPL-3130/J313, ACNW3130
Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
• High speed response.
The ACPL-3130 contains a GaAsP LED while the ACPL-J313
and the ANCW3130 contain an AlGaAs LED. The LED is • Very high CMR.
optically coupled to an integrated circuit with a power
• Bootstrappable supply current.
output stage. These optocouplers are ideally suited for
driving power IGBTs and MOSFETs used in motor control
inverter applications. The high operating voltage range
of the output stage provides the drive voltages required
by gate controlled devices. The voltage and current
supplied by these optocouplers make them ideally suited
for directly driving IGBTs with ratings up to 1200 V/100 A.
For IGBTs with higher ratings, the ACPL-3130 series can be
used to drive a discrete power stage which drives the IGBT
gate. The ANCW3130 has the highest insulation voltage of
• Safety Approval:
UL Recognized
- 3750 V for 1 min. for ACPL-3130/ACPL-J313
rms
- 5000 V for 1 min. for ACNW3130
rms
CSA Approval
IEC/EN/DIN EN 60747-5-5 Approved
- V
- V
- V
= 630 V
= 1230 V
= 1414 V
for ACPL-3130 (Option 060)
IORM
IORM
IORM
peak
for ACPL-J313
for ACNW3130
peak
peak
V
= 1414 V
in the IEC/EN/DIN EN 60747-5-5. The
IORM
peak
ACPL-J313 has an insulation voltage of V
and the V
3130 (Option 060).
= 1230 V
peak
IORM
Specifications
• 2.5 A maximum peak output current.
• 2.0 A minimum peak output current.
= 630 V
is also available with the ACPL-
IORM
peak
Functional Diagram
• 40 kV/µs minimum Common Mode Rejection (CMR) at
V
= 1500 V
CM
N/C
ANODE
CATHODE
N/C
1
8
V
V
V
V
N/C
1
8
V
V
CC
O
CC
O
• 0.5Vmaximumlowleveloutputvoltage(V )eliminates
OL
need for negative gate drive
2
3
4
7
6
5
2
3
4
7
6
5
ANODE
CATHODE
N/C
• I = 5 mA maximum supply current
CC
N/C
• Under Voltage Lock-Out protection (UVLO) with
O
hysteresis
V
EE
EE
SHIELD
SHIELD
• Wide operating V range: 15 to 30 Volts
CC
• 500 ns maximum switching speeds
ACPL-3130 and ACPL-J313
ACNW3130
• Industrial temperature range: -40°C to 100°C
Truth Table
Applications
VCC – VEE
VCC – VEE
• IGBT/MOSFET gate drive
• AC/Brushless DC motor drives
• Industrial inverters
“POSITIVE GOING”
(i.e., TURN-ON)
“NEGATIVE GOING”
(i.e., TURN-OFF)
LED
VO
OFF
ON
ON
ON
0 - 30 V
0 - 11 V
0 - 30 V
0 - 9.5 V
9.5 - 12 V
12 - 30 V
LOW
LOW
• Switching Power Supplies (SPS)
11 - 13.5 V
13.5 - 30 V
TRANSITION
HIGH
Note: A 0.1 µF bypass capacitor must be connected between pins V and V
.
EE
CC
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.