2422 Series
HIGH VOLTAGE POWER SUPPLIES
FEATURES
y Metal Case
y Cost Effective
y Reliable Solid State Design
y Maintenance Free
y Automatic recovery, self restoring
y High Frequency Switch-mode Design
y UL Version Available
y RoHS Version Available
y Formerly CS2422 Series
TYPICAL APPLICATIONS
y Electrostatic Air Cleaners
y Electrostatic Oil Cleaners
TYPICAL ELECTRICAL
SPECIFICATIONS
DESCRIPTION
FOR A STANDARD MODEL
The 2422 series of regulated solid state switching
power supplies is designed for applications
requiring a medium duty high Voltage power
supply. Input is 120 VAC (±10%), 50/60 Hz. Dual
output standard (separate ionizer and collector
connectors ). Connection for a "HV On" indicating
LED is provided.
y Input Voltage: 120 VAC (± 10%) 50/60 Hz
y Output Voltage: 10 kVDC
y Output Current: 3.3 mA Max. Operating
y Output Power: 75 W Max
Output Regulation: See Typical V-I Curve
y Load: May be operated into any load condition
(capacitive, resistive or inductive) or no load.
Can withstand arcing and short circuits.
y Isolated Output; High Voltage referenced to
Earth Ground
The 2422 series is packaged in a metal enclosure
and may be installed in any position. Custom
models are available. Some models are certified UL
Recognized. Consult factory for additional
information.
TYPICAL MECHANICAL
SPECIFICATIONS
NOTICE: This power supply requires adequate
ground connection for operation. Failure to
provide ground could result in failure of the
power supply. Proper ground connections
must be made to #8-32 ground screw on the
metal case.
y Case: Metal
y Input Voltage Termination:
¼" black insulated terminals
y "HV On" Indicating Light Termination:
¼" insulated terminals for LED
y High Voltage Termination:
¼" red insulated terminals
y Earth Ground: #8-32 screw
y Temperature Rating:
Operating 0º to +60ºC
Storage -40º to +85ºC
3227 Skylane Drive
Carrollton, TX 75006
972-248-7691
www.hvpsi.com Rev.1
Specifications subject to change without prior notification