2322 Series
HIGH VOLTAGE POWER SUPPLIES
FEATURES
y Non-Metallic Case
y Cost Effective
y Reliable Solid State Design
y Maintenance Free
y Automatic Over Current Shutdown and Recovery
y High Frequency Switch-mode Design
• UL Recognized Versions Available
• RoHS Versions Available
• Formerly CS2322 Series
TYPICAL APPLICATIONS
y
y
Electrostatic Air Cleaners
Electrostatic Oil Cleaners
DESCRIPTION
TYPICAL ELECTRICAL
SPECIFICATIONS
The 2322 series of regulated solid state switching
power supplies is designed for applications
requiring a medium duty High Voltage power
supply. Input voltage is 120 VAC (±10%), 50/60
Hz. Connection for "HV On" indicating LED is
provided.
y
y
y
y
y
y
y
Input Voltage: 120VAC (±10%)
Input Frequency: 50/60 Hz
Output Voltage: 12 kVDC
Output Current: 1.5 mA Typical
Output Power: 20 W Max
Output Regulation: See Typical V-I Curve
Load: May be operated into any load condition
(capacitive, resistive or inductive) or no load.
Can withstand arcing and short circuits.
Isolated Output; High Voltage Referenced to
Earth Ground
The 2322 series is packaged in a nonmetallic
enclosure and may be installed in any position.
Consult the factory for additional information.
y
y
NOTICE:
This power supply requires
adequate ground connection for operation.
Failure to provide ground could result in
failure of the power supply. Proper ground
connections must be made to input terminal
on the non-metallic case.
TYPICAL MECHANICAL
SPECIFICATIONS
y Case: Glass filled Noryl, UL 94V-1 Rated
y Encapsulant: Filled Epoxy, UL 94V-0 Rated
y Input Voltage Termination:
¼" black insulated terminals
y "HV On" Indicating Light Termination:
¼" black insulated terminals
y High Voltage Termination:
¼" red insulated terminals
y Temperature Rating:
Operating 0º to +60ºC
Storage -40º to +85ºC
3227 Skylane Drive
Carrollton, TX 75006
972-248-7691
www.hvpsi.com Rev.3
Specifications subject to change without prior notification