ACNT-H87B, ACNT-H87A, ACNT-H870
Precision Optically Isolated Voltage Sensor in a
15-mm Stretched SO-8 Package
Data Sheet
Description
Features
The ACNT-H87B/H87A/H870 voltage sensors are optical
isolation amplifiers designed specifically for voltage sensing. Its
2-V input range and high 1-G input impe-dance, makes it well
suited for isolated voltage sensing requirements in electronic
power converters applications including motor drives and
renewable energy systems. In a typical voltage sensing
implementation, a resistive voltage divider is used to scale the
DC-link voltage to suit the input range of the voltage sensor. A
differential output voltage that is proportional to the input
voltage is created on the other side of the optical isolation
barrier.
Advanced sigma-delta (–) modulation technology
Unity gain 1V/V, ±0.5% high gain accuracy (ACNT-H87B)
1-G input impedence
0 to 2V nominal input range
–±5 ppm/°C low gain drift
21 μV /°C offset voltage drift
0.1% non-linearity maximum
Active-high shutdown pin
100-kHz wide bandwidth
±-V to 5.5-V wide supply range for output side
–40°C to +110°C operating temperature range
15 kV/μs common-mode transient immunity
Compact, auto-insertable 15-mm Stretched SO-8 package
Safety and regulatory approvals:
For general applications, the ACNT-H87A (±1% gain tolerance)
and the ACNT-H870 (±±% gain tolerance) are recommended.
For high precision requirements, the ACNT-H87B (±0.5% gain
tolerance) can be used. The ACNT-H87B/H87A/H870 family
operates from a single 5V supply and provides excellent
linearity. An active-high shutdown pin is available, which
—
IEC/EN/DIN EN 60747-5-5: 2262 V working
peak
insulation voltage
reduces the I
current to only 15 μA, making them suitable
DD1
for battery-powered and other power-sensitive applications.
—
—
UL 1577: 7500 V /1 min double protection rating
CSA: Component Acceptance Notice #5
rms
The high common-mode transient immunity (15 kV/μs) of the
ACNT-H87B/H87A/H870 provides the precision and stability
needed to accurately monitor DC-link voltage in high noise
environments. Combined with superior optical coupling
technology, the ACNT-H87B/H87A/H870 implements
sigma-delta (–) modulation, chopper stabilized amplifiers,
and differential outputs to provide unequaled isolation-mode
noise rejection, low offset, high gain accuracy and stability. This
performance is delivered in a compact, auto-insertable 15-mm
Stretched SO-8 (SSO-8) package that meets worldwide
regulatory safety standards.
Applications
Isolated voltage sensing in AC and servo motor drives
Isolated DC-bus voltage sensing in solar inverters, wind
turbine inverters
Isolated sensor interfaces
Signal isolation in data acquisition systems
General-purpose voltage isolation
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage
and/or degradation which may be induced by ESD.
Broadcom
- 1 -