5秒后页面跳转
ACBC-120 PDF预览

ACBC-120

更新时间: 2024-11-21 14:56:39
品牌 Logo 应用领域
力特 - LITTELFUSE /
页数 文件大小 规格书
2页 360K
描述
When 120VAC input is present the alarm circuit can be tested and the unit's secondary function as

ACBC-120 数据手册

 浏览型号ACBC-120的Datasheet PDF文件第2页 
Protection Relays  
Pump Controls and Liquid Level Controls  
ACBC-120 SERIES  
Alarm Controller and Battery Charger for  
pump control panels  
Description  
The ACBC-120 Series is a dual purpose alarm controller/battery  
charging unit. When there is a loss of 120VAC power, the  
ACBC-120’s primary function as an alarm controller activates.  
When this power loss occurs, input power is switched to a  
12VDC, lead-acid, rechargeable backup battery and a 12VDC  
alarm consisting of a strobe light and/or a horn is activated. The  
horn follows a 2 second on/2 second off pattern with a “horn  
silence” option to turn the sound off. An LED indicator on the  
unit also signals that the device has entered the alarm mode.  
When 120VAC input is present the alarm circuit can be  
tested and the units secondary function as a 12VDC backup  
battery charger is activated. In fast charge mode, the unit  
has the capability to source up to 100mA of charging current.  
However, the device normally charges at a current of 14mA in  
maintenance mode. The alarm circuit can be tested by pressing  
the “test” button located on the front of the unit or by activating  
an external switch via the “alarm contact” pin.  
The device has the ability to signal low battery voltage if the  
voltage drops below 10.5VDC. The device can also detect if no  
battery is present or if the battery is connected backwards. In  
either of these cases, the ACBC-120 will signal a battery error  
and will not attempt to charge.  
Wiring Diagram  
Must use Model SD12-PC socket for UL Rating!  
*Note: Manufacturer’s recommended screw terminal torque for the SD Series Sockets is  
12 in.-lbs.  
Features & Benefits  
FEATURES  
BENEFITS  
Controls 12VDC  
alarm circuit  
Activates strobe and/or horn when power  
loss occurs  
Selectable fast  
charge mode  
Unit sources higher charging current up to 100mA  
(normal mode is 14mA)  
Trip delay timer  
Prevents nuisance tripping  
Battery fault detection  
and reverse polarity  
protection  
Signals if battery voltage drops below 10.5VDC and  
can detect if no battery is present or if the battery is  
connected backwards  
LED indication  
Visual indication of unit status or trip  
Preventative maintenance check of the alarm circuit  
by pressing the test button on the unit or externally  
through alarm contact connection  
Test button  
Accessories  
Ordering Information  
SD12-PC 12-pin Rectangle Socket  
LINE  
VOTAGE  
MODEL  
DESCRIPTION  
Rectangle Socket for the ACBC-120.  
12-pin surface mountable.  
ACBC-120  
120VAC Does not include SD12-PC socket for mounting  
ACBC-120-SD 120VAC Includes SD12-PC socket for mounting  
© 2016 Littelfuse Protection Relays & Controls  
www.littelfuse.com/acbc120  
Rev: 1-A-062716  

与ACBC-120相关器件

型号 品牌 获取价格 描述 数据表
ACBC-120-SD LITTELFUSE

获取价格

When 120VAC input is present the alarm circuit can be tested and the unit's secondary func
ACBN08LTE101M101M KOA

获取价格

RC Network, Bussed, 0.4W, 100ohm, 0.0001uF, Surface Mount, 8 Pins, SOIC
ACBN08LTE101M121M KOA

获取价格

RC Network, Bussed, 0.4W, 100ohm, 0.00012uF, Surface Mount, 8 Pins, SOIC
ACBN08LTE101M151M KOA

获取价格

RC Network, Bussed, 0.4W, 100ohm, 0.00015uF, Surface Mount, 8 Pins, SOIC
ACBN08LTE101M181M KOA

获取价格

RC Network, Bussed, 0.4W, 100ohm, 0.00018uF, Surface Mount, 8 Pins, SOIC
ACBN08LTE101M220M KOA

获取价格

RC Network, Bussed, 0.4W, 100ohm, 0.000022uF, Surface Mount, 8 Pins, SOIC
ACBN08LTE101M221M KOA

获取价格

RC Network, Bussed, 0.4W, 100ohm, 0.00022uF, Surface Mount, 8 Pins, SOIC
ACBN08LTE101M270M KOA

获取价格

RC Network, Bussed, 0.4W, 100ohm, 0.000027uF, Surface Mount, 8 Pins, SOIC
ACBN08LTE101M330M KOA

获取价格

RC Network, Bussed, 0.4W, 100ohm, 0.000033uF, Surface Mount, 8 Pins, SOIC
ACBN08LTE101M390M KOA

获取价格

RC Network, Bussed, 0.4W, 100ohm, 0.000039uF, Surface Mount, 8 Pins, SOIC