Rotary Switches
AC09, 16 and 32
The protection of operator section
meets the IP65 (IEC), so these
switches can be used in oil-splash
environments, such as on machine
tool control panels.
A wide choice of output codes fits a
broad range of applications.
Available step angles are 15, 30, and
360°/26 (13.85°). Real binary code,
complementary binary code, and real
gray code are available.
Digital code output type
•
•
ꢀ Description
FUJI AC series rotary switches offer a
wide choice of output codes. They
feature sliding Au-flashed contacts for
high contact reliability. Inhibitor and
parity check circuits guard against
switch malfunctions caused by error
signals. With only seven connections to
make, these switches are an
AC09
Switches are available with
connectors or with lock rings for easy
handling.
Stopper screw positions are user
selectable.
economical solution to multiposition
switching needs.
•
•
AC32
AC16
AF90-209, 210, 211
ꢀ Features
Au-flashed contacts for high contact
reliability.
•
04
ꢀ Ratings
ꢀ Performance
Volts
Operational current (A)
(resistive load)
Rated insulation voltage
Operating temperature
Humidity
60V
–20 to +70°C
45 to 85%RH (non condensation)
50V AC
5V AC
0.05
0.5
Service life
Mechanical
Electrical
50,000 operations
50,000 operations
25V DC
5V DC
0.05
0.25
Dielectric
strength
Between terminals
Between terminals and ground
250V AC, 1 minute
1500V AC, 1 minute
Insulation
resistance
Between terminals
Between terminals and ground
500MΩ or more
5,000MΩ or more
Degree of protection (operator section)
IP65 (IEC)
ꢀ Type number nomenclature
AC 09 – C Z 0 / 25 L1 E A01 / 0007
Basic type
With or without lock ring
Blank: Without lock ring
0007: With lock ring
Mounting
09: M9 nut
0009: With adhesive lock ring
16: M16 adapter
32: Adapter
With or without connector
Blank: 8-terminal, without connector
(32mm mounting pitch)
A01:
A02:
B00:
B01:
B02:
8-terminal, with right-angle connector
8-termianl, with straight connector
7-terminal, without connector
7-terminal, with right-angle connector
7-terminal, with straight connector
Type of code
R: Real binary code
C: Complementary binary code
G: Real gray code
Angle of step
Angle
X: 30°
With or without stopper screw
Setting position
0 to 11
Blank: With stopper screw
E:
Without stopper screw
W: 360°/13 (27.69°)
Y: 15°
Z: 360°/26 (13.85°)
0 to 12
0 to 23
0 to 25
Length of shaft (mm)
AC09 AC16 AC32
L1:
L2:
L3:
L4:
16
18
20
22
—
—
—
14.5
16.5
18.5
20.5
Start position
Available step angle
0 to 11: 30°
0 to 12: 360°/13 (27.69°)
0 to 23: 15°
19.5
0 to 25: 360°/26 (13.85°)
End position
Available step angle
0 to 11: 30°
0 to 12: 360°/13 (27.69°)
0 to 23: 15°
Note: When shorter action than the maximum range of
switch action is used, stopper screws are used.
However, stopper screws are not used if the
maximum action range is used when either 15°
(symbol Y) or 360°/26 (symbol Z) is specified.
0 to 25: 360°/26 (13.85°)
Fuji Electric FA Components & Systems Co., Ltd./D & C Catalog
04/207
Information subject to change without notice