AAT4682
Dual Electronic Resettable Switches
™
SmartSwitch
General Description
Features
The AAT4682 Dual Electronic Resettable fuse is
part of the AnalogicTech Application Specific Power
MOSFET (ASPM™) line of products. It has two 1A
current limited P-channel MOSFET power devices
that remain fully enhanced as long as the input
power supply is above an under voltage lockout
threshold, and the load is below the current limit
setting. If the load increases above the current limit
setting, as is the case during a short circuit, the
MOSFET effectively becomes a constant current
source equal to the current limit. If the current limit
condition persists long enough to heat the MOSFET
to an extreme temperature, both devices will ther-
mal cycle off and on until the current limit condition
is removed. Independent open drain FAULT flags
signal an over current or over temperature condi-
tion. Quiescent current typically is a low 10µA.
•
•
•
•
•
•
Dual P-Channel MOSFETS
500mA steady state load current
600mA minimum current limit trip point
Low quiescent current, typically 10µA.
Over temperature protection
Fast transient response:
•
< 1µs response to short circuit
•
•
•
•
•
400mΩ typical RDS(ON)
Undervoltage Lockout
Temp range -40 to 85°C
FAULT flag with 2ms blanking
6-pin SOT23 package
Applications
The AAT4682 is available in a 6 pin SOT-23, spec-
ified over a -40 to 85°C temperature range.
•
•
•
•
USB ports
Peripheral ports
Desktop PCs
Cell phone ports
Typical Application
AAT4682
5
6
IN
OUTA
OUTB
INPUT
OUTA
OUTB
4
1
3
FAULTA
FAULTB
FAULTA
FAULTB
GND
2
CIN
1µF
COUTA
1µF
COUTB
1µF
GND
GND
4682.2001.11.0.9
1