AAT4610
Current Limited Load Switch
™
SmartSwitch
General Description
Features
The AAT4610 SmartSwitch is a current limited P-
channel MOSFET power switch designed for high-
side load switching applications. This switch oper-
ates with inputs ranging from 2.7V to 5.5V, making it
ideal for both 3V and 5V systems. An integrated
current-limiting circuit protects the input supply
against large currents which may cause the supply
to fall out of regulation. The AAT4610 is also pro-
tected from thermal overload which limits power dis-
sipation and junction temperatures. It can be used
to control loads that require up to 1A. Current limit
threshold is programmed with a resistor from SET to
ground. The quiescent supply current is typically a
low 15µA max. In shutdown mode, the supply cur-
rent decreases to less than 1µA.
•
•
•
Input Voltage Range: 2.7V to 5.5V
Programmable Over-Current Threshold
Fast Transient Response:
— <1µs Response to Short Circuit
Low Quiescent Current
— 15µA Typical
— 1µA Max with Switch Off
160mΩ Typical RDS(ON)
Only 2.5V Needed for ON/OFF Control
Under-Voltage Lockout
Thermal Shutdown
4kV ESD Rating
UL Approved—File No. E217765
5-Pin SOT23 Package
•
•
•
•
•
•
•
•
•
Temperature Range: -40°C to +85°C
The AAT4610 is available in a Pb-free 5-pin SOT23
package and is specified over the -40°C to +85°C
temperature range.
Applications
•
•
•
•
Hot Swap Supplies
Notebook Computers
Peripheral Ports
Personal Communication Devices
UL Recognized Component
Typical Application
INPUT
OUTPUT
IN
OUT
SET
AAT4610
ON (ON)
ON/(ON)
GND
RSET
0.47μF
1μF
GND
GND
4610.2006.09.1.3
Not recommended for new designs; pin-for-pin upgrade: AAT4610A.
1