PRODUCT DATASHEET
AAT3687
BatteryManagerTM
Lithium-Ion/Polymer Battery Charger
General Description
Features
The AAT3687 BatteryManager is a highly integrated sin-
gle-cell lithium-ion/polymer battery charger IC designed
to operate with AC adapter inputs. It requires a mini-
mum number of external components. The AAT3687
precisely regulates battery charge voltage and current
• Input Voltage Range: 4.0V to 5.5V
• Up to 1.5A Charging Current
• Adapter Present Indicator (ADPP#)
• High Level of Integration with Internal:
Charging Device
Reverse Blocking Diode
Current Sensing
▪
for 4.2V lithium-ion/polymer battery cells.
Adapter
▪
charge current rates can be programmed up to 1.5A. An
active thermal management system regulates the fast
charge constant current for all ambient temperature and
input vs. output voltage conditions.
▪
• Active Thermal Loop Charge Reduction
• Automatic Recharge Sequencing
• Battery Temperature Monitoring
• Full Battery Charge Auto Turn-Off / Sleep Mode
• Over-Voltage, Over-Current, and Over-Temperature
Protection
Battery temperature and charge state are fully moni-
tored for fault conditions. In the event of an over-volt-
age or over-temperature failure, the device will auto-
matically shut down, thus protecting the charging device,
control system, and the battery under charge. Status
monitor output pins are provided to indicate the battery
charge status by directly driving two external LEDs. A
serial interface output is available to report 12 various
charging status states to a microcontroller.
• Power On Reset and Soft Start
• Serial Interface Status Report
• 12-Pin 3x3mm TDFN Package
• -40°C to +85°C Temperature Range
Applications
The AAT3687 is available in a Pb-free, thermally-enhanced,
space-saving 12-pin TDFN 3x3mm package and is rated
over the -40°C to +85°C temperature range.
• Cellular Telephones
• Digital Still Cameras
• Hand Held PCs
• MP3 Players
• Personal Data Assistants (PDAs)
• Other Lithium-Ion/Polymer Battery-Powered Devices
Typical Application
BATT+
Adapter
ADPP#
Present
BAT
Enable
EN
COUT
10µF
+
DATA
Serial Interface
TS
CT
BATT-
AAT3687
CT
Adapter
ADP
0.1µF
GND
TEMP
ADPSET
STAT1
CIN
10µF
STAT2
RSET
Battery
Pack
RB1
RB2
LED1
LED2
w w w . a n a l o g i c t e c h . c o m
3687.2008.04.1.12
1