PRODUCT DATASHEET
AAT3685
BatteryManagerTM
Lithium-Ion/Polymer Battery Charger
General Description
Features
The AAT3685 BatteryManager™ is a highly integrated
singlecelllithium-ion/polymerbatterychargerICdesigned
to operate with USB port or line adapter inputs. It
requires the minimum number of external components.
• Adapter or USB Charger
Programmable up to 1A Max
• 4.0V to 5.5V Input Voltage Range
▪
• High Level of Integration With Internal:
Charging Device
Reverse Blocking Diode
Current Sensing
▪
The AAT3685 precisely regulates battery charge voltage
and current for 4.2V lithium-ion/polymer battery cells.
Regardless of the type of input power source (USB or
adapter), the AAT3685 can be programmed for two
separate constant current charge levels up to 1A. An
optional Charge Reduction Loop is built in to allow users
to charge the battery with available current from the
charge supply, while keeping the port voltage regulated.
▪
▪
• Automatic Recharge Sequencing
• Charge Reduction Loop
• Battery Temperature Monitoring
• Full Battery Charge Auto Turn-Off
• Over-Voltage Protection
• Emergency Thermal Protection
• Power On Reset and Soft Start
• Serial Interface Status Reporting
• 12-Pin 3x3mm TDFN Package
Battery temperature and charge state are fully moni-
tored for fault conditions. In the event of an over-volt-
age or over-temperature failure, the device will auto-
matically shut down, thus protecting the charging device,
control system, and the battery under charge. Status
monitor output pins are provided to indicate the battery
charge status by directly driving two external LEDs. A
serial interface output is available to report any one of
14 various status states to a microcontroller.
Applications
• Cellular Telephones
• Digital Still Cameras
• Hand-Held PCs
• MP3 Players
• Personal Data Assistants (PDAs)
• Other Lithium-Ion/Polymer Battery-Powered Devices
The AAT3685 is available in a Pb-free, thermally-enhanced,
space-saving 12-pin 3x3mm TDFN package and is rated
over the -40°C to +85°C temperature range.
Typical Application
Enable
ADP/USB EN CHR
Adapter or USB Input
Input Hi/Lo Select
PWRSEL
SETH
BATT+
BAT
TS
C2
10µF
RSETH
SETL
AAT3685
RSETL
BATT-
GND
DATA
TEMP
STAT1
STAT2
Battery Pack
Serial Data
w w w . a n a l o g i c t e c h . c o m
3685.2007.12.1.4
1