PRODUCT DATASHEET
AAT3683
BatteryManagerTM
1A Linear Li-Ion Battery Charger
General Description
Features
The AAT3683 BatteryManager is a highly integrated sin-
gle-cell lithium-ion / polymer (Li-Ion) battery charger
that operates from a USB port or an AC adapter input up
to an input voltage of 7.5V.
• USB or AC Adapter Input
• Programmable from 100mA to 1A
• 4.0V to 7.5V Input Voltage Range
• High Level of Integration with Internal:
Charging Device
Reverse Blocking Diode
Current Sensing
▪
The AAT3683 precisely regulates battery charge voltage
and current for 4.2V Li-Ion battery cells. The battery
charging current can be set by an external resistor up to
1A.
▪
▪
• Digital Thermal Regulation
• Charge Current Programming (ISET)
• Charge Termination Current Programming (TERM)
• Charge Timer (CT)
• Battery Temperature Sensing (TS)
• TS Pin Open Detection
Digital Thermal Loop Control maintains the maximum
possible battery charging current for the given set of
input to output power dissipation and ambient tempera-
ture conditions.
• Automatic Recharge Sequencing
• Automatic Trickle Charge for Battery Pre-Conditioning
(no trickle charge option available)
• Full Battery Charge Auto Turn-Off / Sleep Mode /
Charge Termination
• 1μA Max. Shutdown Current
• Over-Voltage and Over-Current Protection
• Emergency Thermal Protection
Battery charge state is continuously monitored for fault
conditions. In the event of an over-current, over-voltage,
short-circuit, or over-temperature condition, the device
will shut down automatically, thus protecting the charg-
ing device, control system, and the battery under
charge. A status monitor output pin is provided to indi-
cate the battery charge status by directly driving an
external LED. An open-drain power source detection out-
put is provided to report the power supply status.
• Power On Reset and Soft Start
• 2.2x2.2mm STDFN-10 (AAT3863-2 and -3) and
QFN33-16 (AAT3683-4) Packages
The AAT3683 is available in the Pb-free, thermally-
enhanced, space-saving 2.2x2.2mm 10-pin STDFN
(AAT3683-2 and -3) and 16-pin QFN33 (AAT3683-4)
packages and is specified for operation over the
-40°C to +85°C temperature range.
Applications
• Bluetooth Headsets, Headphones, Accessories
• Cellular Phones
• Digital Still Cameras
• MP3, Portable Music, and Portable Media Players
• Personal Data Assistants (PDAs) and Handheld
Computers
• Other Li-Ion Battery-Powered Devices
Typical Application
ENABLE
ENABLE
BATT+
EN
BATT+
EN
IN
VIN
BAT
VIN
IN
BAT
CIN
CBAT
CIN
CBAT
BATT-
RT
TERM
BATT-
TERM
AAT3683-2
RTERM
AAT3683-4
RTERM
STAT
ADPP#
CT
TEMP
STAT1
TEMP
TS
TS
STAT2
CT
ISET
Battery
Pack
ISET
CT
GND
Battery
Pack
RSET
CT
GND
RSET
w w w . a n a l o g i c t e c h . c o m
3683.2007.11.1.2
1