AAT3111
MicroPower™ Regulated Charge Pump
™
ChargePump
General Description
Features
The AAT3111 ChargePump™ is a MicroPower
switched-capacitor voltage converter that delivers
a regulated output. No external inductor is required
for operation. Using three small capacitors, the
AAT3111 can deliver up to 150mA to the voltage
regulated output. The AAT3111 features very low
quiescent current and high efficiency over a large
portion of its load range making this device ideal
for battery-powered applications. Furthermore, the
combination of few external components and small
package size keeps the total converter board area
to a minimum in space restricted applications. The
AAT3111 operates in an output-regulated voltage
doubling mode. The regulator uses a pulse-skip-
ping technique to provide a regulated output from a
varying input supply. The AAT3111 contains a ther-
mal management circuit to protect the device
under continuous output short circuit conditions.
•
•
Step-up type voltage converter
Input Range
•
•
AAT3111-3.6: 1.8V to 3.6V
AAT3111-3.3: 1.8V to 3.3V
•
•
•
MicroPower consumption: 20µA
3.6V, 3.3V Regulated 4ꢀ output
3.6V Output Current
•
•
100mA with VIN ≥ 3.0V
20mA with VIN ≥ 2.0V
•
3.3V Output Current
•
•
100mA with VIN ≥ 2.5V
20mA with VIN ≥ 1.8V
•
•
•
•
•
High Frequency 750 kHz operation
Shutdown mode draws less than 1µA
Short-circuit/over-temperature protection
2kV ESD Rating
SC70JW-8 or SOT23-6 package
The AAT3111 is available in a surface mount 6-pin
SOT23 or 8-pin SC70JW package and is rated
from -40 to 85°C.
Applications
The AAT3111 ChargePump™ is a member of
AnalogicTech's Total Power Management IC prod-
uct family.
•
•
•
•
•
Handheld Electronics
Digital Cameras
PDAs
Battery Back Up Supplies
MP3 Players
Typical Application
AAT3111
VOUT
VOUT
C+
VIN
C-
1uF
COUT
10uF
VIN
GND
ON/OFF
SHDN
CIN
10uF
3111.2002.3.0.91
1