AAT1210
High Power DC/DC Boost Converter
with Optional Dynamic Voltage Programming
™
SwitchReg
General Description
Features
The AAT1210 is a high power DC/DC boost (step-up)
converter with an input voltage range from 2.7 to
5.5V. The output voltage can be set from VIN + 0.5V
to 18V. The total solution is less than 1mm in height.
High operating efficiency makes the AAT1210 the
ideal solution for battery powered and consumer
applications.
•
•
VIN Range: 2.7V to 5.5V
Maximum Continuous Output
— 900mA at 5V
— 300mA at 12V
— 150mA at 18V
•
•
Up to 2MHz Switching Frequency
Ultra-Small Inductor and Capacitors
— 1mm Height Inductor
— Small Ceramic Capacitors
Hysteretic Current Mode Control
— No External Compensation
— Excellent Transient Response
— High Efficiency at Light Load
Up to 90% Efficiency
Integrated Low RDS(ON) MOSFET Switches
Low Inrush with Integrated Soft Start
Cycle-by-Cycle Current Limit
Short-Circuit and Over-Temperature Protection
True Load Disconnect
The step-up converter operates at frequencies up to
2MHz, enabling ultra-small external filtering compo-
nents. Hysteretic current mode control provides
excellent transient response with no external com-
pensation, achieving stability across a wide operating
range with minimal design effort.
•
•
•
•
•
•
•
•
•
•
The AAT1210 true load disconnect feature extends
battery life by isolating the load from the power
source when the EN/SET pin is pulled low, ensuring
zero volts output during the disable state. This fea-
ture eliminates the external boost converter leakage
path and achieves standby quiescient current <1µA
without an external switching device.
Optional Dynamic Voltage Programming
TDFN34-16 Package
-40°C to +85°C Temperature Range
A fixed output voltage is set using two external resis-
tors. Alternatively, the output may be adjusted dynami-
cally across a 2.0x range. The output can toggle
between two preset voltages using the SEL logic pin.
Optionally, the output can be dynamically set to any
one of 16 programmed levels using AnalogicTech's
patented Simple Serial Control™ (S2Cwire™) interface.
Applications
•
•
•
•
•
•
GPS Systems
DVD Blu-Ray
Handheld PCs
PDA Phones
Portable Media Players
USB OTG
The AAT1210 is available in a Pb-free, thermally-
enhanced 16-pin 3x4mm TDFN low-profile package
and is rated over the -40°C to +85°C temperature
range.
Typical Application
VIN
3.6V
VOUT
5V @ 900mA
AAT1210 Boost Converter Output Capability
(TDFN34-16; TAMB = 25°C; TC(RISE) = +50°C)
L1
0.47µH
AAT1210
TDFN34-16
D1
1400
1200
1000
800
600
400
200
0
7
VIN
LIN
VIN = 4.5V
SW
EN/SET
SEL
VIN = 3.6V
FB1
R2
40.2kΩ
VIN = 2.7V
GND
FB2
C2
C1
4.7µF
0603
10µF
0603
R3
4.99kΩ
5
6
7
8
9
10
11
12 13
14 15
16 17
18
Output Voltage (V)
1210.2007.02.1.2
1