A8583
Wide Input Voltage, 2.4 MHz, 3.5 A
Asynchronous Buck Regulator
Description
Features and Benefits
• Wide operating voltage range: 4.7 to 36 V
• UVLO stop threshold is at 3.8 V (typ)
• Supports 40 V input for surge and load dump testing
• Capable of at least 3.5 A steady-state output current
• Adjustable output voltage as low as 0.8 V
• Internal 70 mΩ high-side switching MOSFET
• Adjustable switching frequency, fSW: 0.25 to 2.4 MHz
• Synchronization to external clock: 1.2×fSW to 1.5×fSW
• Sleep mode supply current less then 3 μA
• Soft start time externally set via the SS pin
• Very low no-load current, typically 3.5 mA
• Pre-bias startup compatible
The A8583 is an adjustable frequency, high output current,
PWM regulator that integrates a low resistance, high-side,
N-channel MOSFET. The A8583 incorporates current-mode
control to provide simple compensation, excellent loop
stability, and fast transient response. The A8583 utilizes
external compensation to accommodate a wide range of power
components to optimize transient response without sacrificing
stability.
The A8583 regulates input voltages from 4.7 to 36 V, down to
output voltages as low as 0.8 V, and is able to supply at least
3.5Aof load current.TheA8583 features include an externally
adjustable switching frequency, an externally set soft start
time to minimize inrush currents, an EN/SYNC input to either
enable VOUT and/or synchronize the PWM switching
frequency, and a Power OK (POK) output to indicate when
VOUTiswithinregulation.TheA8583onlyturns-onthelower
FETtochargethebootcapacitorwhenneeded,noteveryPWM
• Power OK (POK) output
• Pulse-by-pulse current limiting (OCP)
• Hiccup mode short-circuit protection (HIC)
• Overtemperature protection (TSD)
• Overvoltage protection (OVP)
• Missing asynchronous diode (D1) protection
• Open-circuit and adjacent pin short-circuit tolerant
• Short-to-ground tolerant at every pin
• Externally adjustable compensation
• Stable with ceramic output capacitors
Continued on the next page…
Package: 16-pin TSSOP (suffix LP)
Applications:
• GPS/infotainment
• Automobile audio
• Home audio
• Network and telecom
Not to scale
Typical Application
L
O
1.5 μH
VIN
VOUT
1
16
15
VIN
2
SW
SW
VIN
CIN1
3.3 μF
50 V
CIN2
3
CBOOT
100 nF
D1
CO1
10 μF
16 V
CO2
10 μF
16 V
VIN
50 V
4 A/40 V
SMB
A8583
Empty
5
12
GND
GND
14
10
RS1
16.5 kΩ
BOOT
FBX
7
4
8
EN/SYNC
SS
RS2
5.23 kΩ
CFBX
120 pF
CSS
22 nF
FSET
9
6
11
FB
COMP
RFB1
16.5 kΩ
3.3V
RFSET
11.5 kΩ
RFB2
5.23 kΩ
RZ
PAD
18.2 kΩ
RPU
2 kΩ
CZ
CP
4.7 pF
1.2 nF
POK
POK
Figure 1. Application schematic, at VIN 5 to 16 V, 3.3 VOUT , at 2 MHz
A8583-DS, Rev. 14