Datasheet > A8426EESTR-T

A8426EESTR-T

更新时间： 2024-01-11 14:13:01

品牌	Logo	应用领域
急速微 - ALLEGRO		驱动器闪光灯双极性晶体管
页数	文件大小	规格书
16页	445K
描述
High Performance Photoflash Capacitor Charger with IGBT Driver

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

A8426EESTR-T 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Obsolete	包装说明：	TQFN-16
Reach Compliance Code：	compliant	风险等级：	5.83
接口集成电路类型：	INTERFACE CIRCUIT	JESD-30 代码：	S-XQCC-N16
JESD-609代码：	e3	长度：	3 mm
湿度敏感等级：	1	功能数量：	1
端子数量：	16	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	UNSPECIFIED
封装代码：	HVQCCN	封装形状：	SQUARE
封装形式：	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	峰值回流温度（摄氏度）：	NOT SPECIFIED
座面最大高度：	0.8 mm	最大供电电压：	11 V
最小供电电压：	1.5 V	标称供电电压：	3.6 V
表面贴装：	YES	温度等级：	INDUSTRIAL
端子面层：	Matte Tin (Sn)	端子形式：	NO LEAD
端子节距：	0.5 mm	端子位置：	QUAD
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	3 mm

A8426EESTR-T 数据手册

A8426

High Performance Photoflash Capacitor Charger

with IGBT Driver

Features and Benefits

Description

▪ Wide battery voltage range: 1.5 to 11 V

▪ Integrated 55 V DMOS switch with 3.2 A current capability

▪ User-adjustable peak current limit, from 1 to 3.2 A

▪ Secondary-side voltage sensing for easily-adjustable

output voltage

The A8426 is a highly integrated IC that rapidly charges

photoflash capacitors for SLR cameras, digital cameras, and

camcorders with integrated digital cameras. A flexible IGBT

driver is integrated to save board space.

TheA8426integratesa3.2A-capable,55V-ratedDMOSswitch

that drives the transformer in flyback configuration, allowing

optimized design with tight coupling and high efficiency. The

peak switch current is user-adjustable between 1 and 3.2 A,

using a resistor to ground. A proprietary control scheme

optimizes the capacitor charging time. Low quiescent current

and low-power Standby mode current further improve system

efficiency and extend battery life.

▪ >75% efficiency

▪ Fast charging time

▪ Charge complete indication

▪ Flexible, high current IGBT driver

▫ Independent IGBT driver supply

▫ Separate sink and source pins with 6 Ω pull-up and

20 Ω pull-down

▫ Interlocked trigger pins improve noise immunity

▪ No primary-side Schottky diode needed

The A8426 is available in a 16-contact 3 mm×3 mm TQFN

package with exposed pad for enhanced thermal performance.

This small, very thin profile (0.75 mm nominal overall height)

package is ideal for space-constrained applications. It is lead

(Pb) free, with 100% matte-tin leadframe plating.

Package: 16-contact TQFN (suffix ES)

Applications include:

▪ SLR camera flash

▪ Digital camcorder/DSC combo flash

▪ 2 Li+ input strobe

Approximate Scale 1:1

Typical Application

Bias Input

3.0 to 5.5 V

Battery Input

1.5 to 11 V

VBAT

1 : 10

COUT

100 μF

330 V

VIN

TLIM

ISET

150 k7

Control

Block

150 k7

I_SWsense

RSET

VPULLUP

CHARGE

1.20 k7

DONE

100 kΩ

DONE

VDRV

IGBT Driver

GSOURCE

TRIGGER1

TRIGGER2

IGBT Gate

GSINK

GND

Figure 1. Typical application circuit with resistor bridge control of feedback.

A8426-DS, Rev. 1

12 3 4 5 6 7...16

下载PDF

与A8426EESTR-T相关器件

型号	品牌	描述	获取价格	数据表
A8430	ALLEGRO	White LED Driver Constant Current Step-up Converter	获取价格
A8430EEK	ALLEGRO	White LED Driver Constant Current Step-up Converter	获取价格
A8430EEK-T	ALLEGRO	White LED Driver Constant Current Step-up Converter	获取价格
A8430EEKTR	ALLEGRO	LED Driver, 1-Segment, 3 X 3 MM, 0.75 MM HEIGHT, MLP-5	获取价格
A8430EEKTR-T	ALLEGRO	LED Driver, 1-Segment, 3 X 3 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, MLP-5	获取价格
A8430EK	ALLEGRO	LED Driver, 1-Segment, PDSO5, SOT-23, 5 PIN	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

A8426EESTR-T

A8426EESTR-T 技术参数

A8426EESTR-T 数据手册

与A8426EESTR-T相关器件

与A8426EESTR-T相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

A8426EESTR-T

A8426EESTR-T 技术参数

A8426EESTR-T 数据手册

与A8426EESTR-T相关器件

与A8426EESTR-T相关文章

您还可以找

您在本页遇到什么问题？