Ampson Technology, Inc.
A6852S/N
SINGLE OUTPUT HALL EFFECT SWITCH IC
ꢀ FEATURES
1) Wide range of supply voltage:3.5V to 28V.
2) Internal bandgap regulator allows temperature
compensated operations and a wide operating
voltage range.
4) TTL and MOS ICs directly drivable by output.
5) Build in protection diode for chip reverse power
connecting.
6) Package: SIP-3.
3) High sensitivity with a small magnet.
ꢀ GENERAL DESCRIPTION
A6852S/N is an integrated Hall effect switch sensor
with output pull-high resistor driver designed for
electronic commutation of brushless DC motor
applications and contactless switches. The device
includes an on-chip Hall voltage generator for
magnetic sensing, a comparator that amplifies the Hall
voltage, and a Schmitt trigger to provide switching
hysteresis for noise rejection, and output driver with
pull-high resistor. An internal bandgap regulator is
used to provide temperature compensated supply
voltage for internal circuits and allows a wide
operating supply range.
If a magnetic flux density larger than threshold Bop,
DO is turned on(low). The output state is held until
a magnetic flux density reversal falls below Brp
causing DO to be turned off(high).
A6852S/N is srated for operation over temperature
range from -20 oC to 100 oC and voltage range from
3.5V to 28V. The devices are available in low cost
die forms or rugged 3 pin SIP packages.
ꢀ APPLICATIONS
1) DC Motor
2) DC Fan
3) Position Sensors
4) Rotation Sensors
5) Revolution Counting
6) Speed Measurement
7) Keyboard Switches
8) Microswitches
1/5
8/11/2003 REV.1.1