APPLICABLE STANDARD
Operating
Storage
Temperature Range
-55 C to +85 C(1)
-10 C to +60 C(2)
Temperature Range
Operating
Humidity Range
Storage
Humidity Range
Relative humidity 85 % max (Not dewed)
Relative humidity 85 % max (Not dewed)
Rating
Voltage
200 V AC
1 A
Applicable Cable
Insulation
-
-
Current
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
×
×
×
×
Marking
ELECTRIC CHARACTERISTICS
Contact Resistance
15 mΩ MAX.
×
×
×
100 mA (DC or 1000 Hz).
500 V DC.
650 V AC for 1 min.
-
-
-
Insulation Resistance
Voltage Proof
1000 MΩ MIN.
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
Mechanical Operation
100 times insertions and extractions.
1) Contact Resistance : 20 m MAX.
×
×
-
-
2) No damage, crack and looseness of parts.
1) No electrical discontinuity of 1 s.
2) No damage, crack and looseness of parts.
Vibration
Frequency 10 to 55 Hz,
Single amplitude : 0.75 mm,
2 h in 3 directions.
490 m/s2, duration of pulse 11 ms
at 3 times for 3 both axial directions.
Shock
×
-
ENVIRONMENTAL CHARACTERISTICS
Damp Heat
Exposed at 40 ± 2 C, 90 to 95 %, 96 h.
1) Contact Resistance : 20 m MAX.
×
×
-
-
(Steady state)
Rapid Change of
Temperature
2) Insulation Resistance : 1000 M MIN.
3) No damage, crack and looseness of parts.
Temperature
-55 → +5 to +35 → +85 → +5 to +35 C
Time
30 → 10 to 15 → 30 → 10 to 15 min.
Under 5 cycles.
Corrosion Salt Mist
Sulphur Dioxide
Exposed in 5 % salt water spray for 48 h.
1) Contact Resistance : 20 m MAX.
2) No heavy corrosion.
×
×
-
-
Exposed in 10 PPM for 96 h.
(Test standard: JEIDA 39)
Resistance to
Soldering Heat
Solder bath : Solder temperature,
260 ± 5 C for immersion, duration, 10 ± 1 s.
(JIS C 5402-12-4, JIS C 60068-2-20)
Soldering irons : 360C for 5 sec MAX.
No deformation of case of excessive
looseness of the terminals.
×
-
×
×
-
-
Solderability
Soldered at solder temperature,
245 ± 3 C for immersion duration, 3 sec.
A new uniform coating of solder shall cover a
minimum of 95 % of the surface
being immersed.
COUNT
DESCRIPTION OF REVISIONS
DIS-F-00004289
DESIGNED
HR.NAGAYASU
CHECKED
DATE
1
1
HT.YAMAGUCHI
20190221
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
NH.NAKATA
HT.YAMAGUCHI
HR.NAGAYASU
HR.NAGAYASU
20170410
20170410
20170410
20170410
(1) Temperature rise included when energized.
(2) ”STORAGE” means a long-term storage state for the unused product
before the board mounted.
Unless otherwise specified, refer to IEC-60512.
Clerical corrections.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
ELCX-375932-00-00
A4B-*PA-2DSA(51)
DRAWING NO.
PART NO.
CODE NO.
SPECIFICATION SHEET
1/1
HIROSE ELECTRIC CO., LTD.
1
△
CL622
FORM HD0011-2-1