A4061
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
500mA/1.5A STANDALONE LINEAR LI-ION BATTERY CHARGE
DESCRIPTION
FEATURES
The A4061 is a single cell, fully integrated constant
current (CC)/constant voltage (CV) Li-ion battery
charger. Its compact package with minimum
external components requirement makes the A4061
ideal for portable applications.
No external sense resistor or blocking diode is
necessary for the A4061. Build-in thermal feedback
mechanism regulates the charge current to control
the die temperature during high power operation or
at elevated ambient temperature.
The A4061 has a pre-charge function for trickle
charging deeply discharged batteries. The fast
charge current can be programmed by an external
resistor. CV regulation mode is automatically
enabled once the battery’s charging curve reaches
the constant voltage portion. The output current then
decays and is finally terminated once the charge
current drops to 1/10th of the programmed value.
The A4061 keeps monitoring the battery voltage and
enables a new charge cycle once the voltage drops
by 150mV below the CV value.
Standalone Capability with no Requirement
of External MOSFET, Sense Resistor or
Blocking Diode.
Complete Linear Charger in Compact Package
for Single Cell Lithium-Ion Batteries
Programmable Pre-charge, Fast Charge and
Termination Current.
Constant-Current/Constant-Voltage Operation
with Thermal Regulation to Maximize Charge
Rate Without Risk of Overheating
Charges Single Cell Li-Ion Batteries Directly
from USB Port
Preset 4.2V/4.35V Charge Voltage with ±1%
Accuracy
Automatic Recharge
Charge Status Output Pin
C/10 Charge Termination
25uA Supply Current in Shutdown
2.9V Trickle Charge Threshold
Soft-Start Limits Inrush Current
Available in SOT-26 and PSOP8 Packages
Power supply state is constantly monitored and the
battery drain current is reduced to minimum value
automatically when the A4061 senses a lack of input
power. In its shutdown mode, the A4061 can reduce
the supply current to less than 25μA. A status pin
outputs a logic HIGH/LOW to indicate the charging
status and the presence of power supply.
APPLICATION
Cellular Telephones, PDAs, MP3 Players
Charging Docks and Cradles
Bluetooth Applications
ORDERING INFORMATION
Other features include charge current monitor,
under-voltage lockout.
Package Type
SOT-26
Part Number
The A4061 is available in SOT-26 and PSOP8
packages.
A4061E6R-XXX
A4061E6VR-XXX
A4061MP8R
E6
TYPICAL APPLICATION
PSOP8
Note
MP8
A4061MP8VR
XXX: Output Voltage
420=4.20V; 435=4.35V
V: Halogen free Package
R: Tape & Reel
AiT provides all RoHS products
Suffix ꢀ V ꢀ means Halogen free Package
REV1.1
- JUN 2014 RELEASED, SEP 2014 UPDATED -
- 1 -