A3.0SMCJ11A thru A3.0SMCJ48CA
Surface Mount Transient Voltage Suppressors
Peak Pulse Power 3000W Stand-off Voltage 11 to 48V
Features
• Available in uni-directional polarity only
• Excellent clamping capability
• Moisture sensitivity: level 1, per J-STD-020
• Excellent clamping capability and Fast response time
• 3000 W peak pulse power capability with a 10/1000 µs waveform
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
• AEC-Q101 Qualified
DO-214AB(SMC)
Typical Applications
Use in sensitive electronics protection against voltage transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and
telecommunication.
Devices for Bidirectional Applications
Electrical characteristics apply in both directions.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Value
3000
Unit
W
Parameter
Symbol
1)
Peak power dissipation with a 10/1000us waveform
Peak pulse current with a 10/1000us waveform
PPPM
1)
See Next Table
A
IPPM
Peak forward surge current,8.3ms single half sine-wave uni-
directional only
IFSM
250
3.5
A
V
Maximum instantaneous forward clamping voltage at 100A(uni-
directional only)
VF
TJ, TSTG
-55 to +150
100
Operating junction and storage temperature range
Thermal resistance, junction to ambient air
Thermal resistance, junction to lead
℃
2)
℃/W
℃/W
RθJA
RθJL
20.8
Notes:
1) Non-repetitive current,per fig.3 and derated above TA=25℃ per fig.2.
2) Mounted on recommended pad layout
www.goodark.com
1/5
2019.06-Rev.B