A1454
3V Hall Effect Linear Sensor with I2C Output
FEATURES AND BENEFITS
DESCRIPTION
• 1 mm thin (TSSOP-08) package
TheA1454linearHalleffectsensorICprovidesa12-bitdigital
• 2 factory programmed sensitivity options: 2 LSB/G (for
fields up to ±1000 G) and 4 LSB/G (±500 G)
• Temperature-stable sensitivity for NdFeB and ferrite
magnets
output word that is proportional to the strength of the magnetic
fieldthatispresent.Itsquiescentoutputvalueisatmid-scale,and
it comes in 2 different factory programmed sensitivity ranges:
2LSB/G & 4LSB/G. The sensitivity temperature coefficient
is also factory programmed to support either Neodymium or
Ferrite magnets. The A1454 incorporates an I2C interface for
easy integration into a wide variety of applications. The I2C
address can either be set by external resistors or programmed
via EEPROM, to support up to 127 unique I2C addresses,
allowing for multiple ICs on the same bus. It also includes 16
bytes of user programmable EEPROM.
• I2C interface for easy integration with support for up to
127 unique addresses
• EEPROM stores factory programmed settings and up to
16 bytes of user information (programmable through the
I2C interface)
• Micro-power sleep mode through I2C command for
minimizing power in battery-operated applications
• Precise recoverability after temperature cycling
• Wide ambient temperature range: –40°C to 125°C
• 12-bit ADC with 10-bit ENOB (Effective Number of
Bits)
TheA1454I2Cinterfaceprovidesauser-controlledsleepinput
command that puts the device in micro-power mode, which
reducesthecurrentconsumptionoftheA1454.Thislowpower
feature makes theA1454 perfect for portable, battery-operated
applications.
The BiCMOS monolithic process allows the integration of
both high precision analog and high-density digital circuitry.
The A1454 integrates the Hall element, a 12-bit ADC, gain &
offset compensation circuitry, EEPROM memory and the I2C
interface on a single monolithic IC that is packaged in a space
saving surface mount package.
Package: 8-Pin TSSOP (suffix LE)
Engineering samples are available on a limited basis. Contact your sales or
applications support office for additional information.
Not to scale
VCC
VCC
VCC
Sleep
Mode
I2C Serial
SDA
Interface
SCL
VCC
10 kΩ
10 kΩ
I2C
Master
SCL
VCC
VCC
0.1 µF
Digital Controller
ADC
SDA
VA0
ADR0
Hall
Element
VCC
A1454
ADR0
ADR1
Slave
Address
ADC
VA1
ADR1
NC
GND
NC
EEPROM
Memory
Charge
Pump
GND
Functional Block Diagram
Typical Application Circuit
A1454-DS